Can you guys point me to the thread or threads on installing new bars on the Fat Boy? Damned if my searching isnt finding the threads that I thought I had bookmarked before...

Thanks in advance...

I'm pretty sure I have it covered, but I am also hard headed and know that you guys have offered some really good advice on what to avoid.

 

https://www.hdforums.com/forum/softa...done-pics.html

https://www.hdforums.com/forum/softa...r-install.html

https://www.hdforums.com/forum/softa...tall-pics.html

https://www.hdforums.com/forum/dyna-...e-install.html

 

There are a lot of good install links in these threads...I used them to do my install this winter:
https://www.hdforums.com/forum/softa...r-install.html This is the one I used the most.
https://www.hdforums.com/forum/softa...-09-flstf.html
https://www.hdforums.com/forum/softa...7-classic.html
https://www.hdforums.com/forum/softa...-question.html
https://www.hdforums.com/forum/softa...-09-flstf.htmlThere links inside this post.

Good luck and take your time ----it isn't that bad. Always good to have a manual handy.

 

Thank guys! I had a pretty good idea of what to expect, but I picked up quite a few tips to make my life easier and the install more fun than frustration! Headed to HD to pick up the gasket now and after I get back from a reggae fest tonight, I'll start!!!!!

 

https://www.hdforums.com/forum/dyna-...e-install.html

This one helped me out quite a bit, kuma mentioned it above as well

 

Hey, thanks again guys, they all helped. I read them a few times, misread a few and avoided lot's of little problems by referencing them all.

Of course, I'm not done, turned out that I was missing one part, but it's all good! Should be done the day after I get the part.