Tank lift for 11 Rocker
#1
Tank lift for 11 Rocker
Hey, first time posting here. I bought my '11 rocker a few months ago, and have slowly been doing some mods, my next is a tank lift. I will need to do something with the signals, either on the forks, or mirrors. Does anyone have suggestions on either the tank lift or mirrors vs. Fork? Thanks
#2
I moved the turnsignals to the forks when I installed my new bars.
Some have mounted the turnsignals down below onto the front peg mount bracket.
You'll notice a hole already there and they use that to mount them. Same spot many stick a gremlin bell.
Some have the HD mirrors with built-in signals. Some go with the Heartland signal/mirrors. There are other brands out there also.
Some have mounted the turnsignals down below onto the front peg mount bracket.
You'll notice a hole already there and they use that to mount them. Same spot many stick a gremlin bell.
Some have the HD mirrors with built-in signals. Some go with the Heartland signal/mirrors. There are other brands out there also.
#3
Join Date: Nov 2010
Location: Red Banks, Mississippi
Posts: 17,727
Received 4,193 Likes
on
2,440 Posts
Welcome to the forum from NW Mississippi!
Here's a Rocker with a tank lift-
Here's a link where you can choose from 1.5, 2, 2.5 or 3" Lift kits.
http://www.dkcustomproducts.com/Gas-...ft-Kits_c4.htm
Here's a Rocker with a tank lift-
Here's a link where you can choose from 1.5, 2, 2.5 or 3" Lift kits.
http://www.dkcustomproducts.com/Gas-...ft-Kits_c4.htm
#5
Just ordered my tank lift.
Welcome to the forum from NW Mississippi!
Here's a Rocker with a tank lift-
Here's a link where you can choose from 1.5, 2, 2.5 or 3" Lift kits.
http://www.dkcustomproducts.com/Gas-...ft-Kits_c4.htm
Here's a Rocker with a tank lift-
Here's a link where you can choose from 1.5, 2, 2.5 or 3" Lift kits.
http://www.dkcustomproducts.com/Gas-...ft-Kits_c4.htm
#6
I got mine on ebay for $10 less than they offer it direct.
http://chopperstyle.net/category/tank-lift/
They weld a nut on the back side for the upper hardware mount.
I prefer the beefier construction and look of it to others out there.
http://chopperstyle.net/category/tank-lift/
They weld a nut on the back side for the upper hardware mount.
I prefer the beefier construction and look of it to others out there.
#7