anyone experiance problom with units i went out to start my softail and it would just crank over not start so i removed the tunner and if fired up anyone else have this kind of issues thanks

 

Nope. Best bet is to contact Fuel Moto. They are great on the phone.

 

I'm running their set-up as well. No problems here. I'm running a PC-V and the O2 sensors aren't connected anymore. Not sure mine would run like that. You didn't say what year you had.

 

No issues with mine in over a year of use. I have read about other guys having trouble after riding in the rain or washing their bikes but I haven't had any at all. I bet Jaime at fuel moto can help you out.

 

03 fatboy no rain just put on october 7th had them remap it a second time due to still a little lean ran it again fine bought a new bike havent rode it in 3 weeks went to start it and it just cranks over not battery becuse if fires when i remove tunner from ecm

 

I'm running a PCV no issues

 

I sound's like it may have to go back to Jamie to be tested. I believe I'd put it back in, check for indicator lights and try it again.

 

For technical support you can contact us at 877-729-4754 and we would be happy to help you

 

Never had any problems out of my PC III on my 08 and the V on my 11.

 

I just installed the PC V on my Heritage and i did noticed that it does crank for a second or two whereas before it fired right up. I think I remember reading on here that you should fire it up right away and not wait for it to cycle through it's checks. But the best bet is to call Jamie at Fuel Moto. Let us know how you make out.