Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

RB Racing LSR 2-1 Exhaust

Thread Tools
 
Search this Thread
 
  #1  
Old 06-03-2010 | 10:23 PM
dieselskid's Avatar
dieselskid
Thread Starter
|
Intermediate
Joined: Nov 2009
Posts: 36
Likes: 0
Default RB Racing LSR 2-1 Exhaust

Anyone have any luck with the LSR 2-1 Exhaust by RB Racing? From what I have heard it has all been good.. anyone got any feedback on them or their procducts?
 
  #2  
Old 06-04-2010 | 09:06 PM
Tx_Outlaw's Avatar
Tx_Outlaw
Elite HDF Member
Joined: Sep 2005
Posts: 4,668
Likes: 5
From: Aledo, Texas
Default

Best exhaust you can put on your bike under 100 cu in! Excellent power thru-out the rpm range, great sound, and perfect on the quality.
 
  #3  
Old 06-04-2010 | 09:16 PM
back again's Avatar
back again
Seasoned HDF Member
Joined: May 2005
Posts: 10,360
Likes: 6,582
From: Georgia
Default

I've been running them for about 4 years now. Welds are some of the best I've ever seen.Not the best looking but what 2-1 is.Sound kicks.C-style LSR
 
  #4  
Old 06-04-2010 | 09:37 PM
BLKBAGGER's Avatar
BLKBAGGER
Outstanding HDF Member
Joined: Oct 2007
Posts: 3,450
Likes: 4
From: El Cajon Ca.
Default

I ran one for over 70,000 miles on my last bike. i loved it. best pipe i ever had. the last time I saw it was when i went to look at my bike after totaling it. pipe was crushed real bad.
 
  #5  
Old 06-04-2010 | 11:53 PM
dieselskid's Avatar
dieselskid
Thread Starter
|
Intermediate
Joined: Nov 2009
Posts: 36
Likes: 0
Default

Just curious, what would you suggest for over 100 cu inch?
 
  #6  
Old 06-04-2010 | 11:56 PM
dieselskid's Avatar
dieselskid
Thread Starter
|
Intermediate
Joined: Nov 2009
Posts: 36
Likes: 0
Default

Originally Posted by back again
I've been running them for about 4 years now. Welds are some of the best I've ever seen.Not the best looking but what 2-1 is.Sound kicks.C-style LSR
Is that the pro stock un baffled pipe that you have on your bike? I didn't think you could get the straight cut with the lsr... Just the slash cut or turn down.
 
  #7  
Old 06-05-2010 | 12:02 AM
BLKBAGGER's Avatar
BLKBAGGER
Outstanding HDF Member
Joined: Oct 2007
Posts: 3,450
Likes: 4
From: El Cajon Ca.
Default

Originally Posted by dieselskid
Just curious, what would you suggest for over 100 cu inch?
I would run the LSR C style with the 3/4 turn out. I don't know if 100ci is big enough for the 2" primary tubes or not. Depends on what bike and riding style. I would probably go with the smaller tubes for low end torque.
 
  #8  
Old 06-05-2010 | 01:50 AM
mimo's Avatar
mimo
Extreme HDF Member
Joined: Jul 2006
Posts: 10,058
Likes: 7
From: MEXICO
Default

2 into 1's are not pretty pipes... they're very un-Harley (classic). They're made to perform and sound (I have 2-1 Thunderheaders) and I love 'em. If I had to put different pipes on my bike it would be LSR's or Roadhouse pipe perhaps.

Mimo.
 
  #9  
Old 06-05-2010 | 07:08 AM
Tx_Outlaw's Avatar
Tx_Outlaw
Elite HDF Member
Joined: Sep 2005
Posts: 4,668
Likes: 5
From: Aledo, Texas
Default

Originally Posted by BLKBAGGER
I would run the LSR C style with the 3/4 turn out. I don't know if 100ci is big enough for the 2" primary tubes or not. Depends on what bike and riding style. I would probably go with the smaller tubes for low end torque.
True. I would think the Pro Stock would kick in around the 115+ cu. in. area if runnig performance parts. The pipe on Gordon's bike above is now in my possession and the one below is in his........

 
  #10  
Old 06-05-2010 | 08:04 AM
silvrbill's Avatar
silvrbill
Road Warrior
Joined: May 2007
Posts: 1,635
Likes: 58
From: Bishkek, Kyrgyzstan
Default

I run the LSR 2-1 w/45 degree turnout.
It's a car alarms worst nightmare.......
 


Quick Reply: RB Racing LSR 2-1 Exhaust



All times are GMT -5. The time now is 02:27 AM.