Trick New Garage Door Opener Switch (PICS)
#1
Trick New Garage Door Opener Switch (PICS)
So I got tired of carrying around the garage door opener in my jacket and wanted something a little more custom. I bought an identical switch to the one on the left side of my tank console (the one you use to scroll through mileage and time and stuff). I drilled a hole on the right side of the console and mounted the switch and then wired it to my garage door opener and hid it all inside the console. Looks stock and its easy to reach.
Inside view of switch mounted in console...
Opener mounted inside. I just used two-sided tape...
Finished...
Cost about $10 and only had to drill one hole.
Inside view of switch mounted in console...
Opener mounted inside. I just used two-sided tape...
Finished...
Cost about $10 and only had to drill one hole.
#3
#7
Trending Topics
#8
Each opener is a little different. Just pop it open and look at the button that opens your door from the inside. It just makes a connection between two metal strips. I soldered wires to each side and ran them out of the switch. If your opener is like mine, let me know and I will pop it open and take a pic...no problem.
#9