hey thanks for the in put and pics... shouldn't be a problem

 

BnCDeluxe and I have the same setup: Shotgun Shock. It's an awesome setup with unlimited adjustment.

You can kind of see how low I normally ride with mine, and still have suspension left from the pic in this thread: https://www.hdforums.com/forum/softa...-cool-pic.html

 

Bump, I'm going to do this mod this winter.

 

Lots of nice bikes.

 

Great thread! I have an 07 Deluxe and would love nothing more than to get the nacelle headlight cover on my bike! I have a cover from an 07 roadking. Will that fit with doing the necessary grinding of the light bar bracket that was discussed on this thread. Or has all this talk, about just simply grinding the bracket down, to have it fit right been for the HD nacelle cover kit from the Harley parts book? I hope my question makes sense. I just want to know can I make the roadking nacelle fit on my soft ail? Anything else I would have to do to have it fit properly aside from grinding and different risers? I would love to save the $400 by not having to buy the HD nacelle kit, thanks.

 

wont work bro, rk nacelle is wider then the softail. You could make it work with some spacers but it is going to make your cans look out of place because there will be a 1/2" gap on the outer edges

 

Hey guys...For those who don't want to grind their bar tabs down... Harley sells passing lamp mounts that bolt right up..They look like the stock deluxe ones if you removed the bar that connects the two sides. They are for touring bikes.

Here they are


http://www.harley-davidson.com/gma/g...bmLocale=en_US

Might wanna check and see if the mounting holes line up though. I found these browsing the Harley site