Calling all FatBoy Lo Owners
#6001
03-02-2012, 08:53 AM
Elite HDF Member
Hey Jim,
New to the conversation on trim rings.. If you have it, what is the part number for your visored trim ring? I got part number 69733-05 and that thing is just too big for the stock headlight on my 2010 Lo. Just sitting it around the headlight The gap at the bottom of the new visored ring almost closes together even being around the bottom tab of the original trim ring. I dont see any way it will fasten tightly. And then, even if the circumference were correct, there is about a half inch gap between the front of the headlight and the back of the new trim ring leaving a void there you could stick your index finger into.
Any help would be appreciated... from anyone!!
Thanks.
New to the conversation on trim rings.. If you have it, what is the part number for your visored trim ring? I got part number 69733-05 and that thing is just too big for the stock headlight on my 2010 Lo. Just sitting it around the headlight The gap at the bottom of the new visored ring almost closes together even being around the bottom tab of the original trim ring. I dont see any way it will fasten tightly. And then, even if the circumference were correct, there is about a half inch gap between the front of the headlight and the back of the new trim ring leaving a void there you could stick your index finger into.
Any help would be appreciated... from anyone!!
Thanks.
http://www.harley-davidson.com/gma/g...bmLocale=en_US
#6002
03-02-2012, 09:15 AM
Road Captain
Thanks guys, I do have a set of 4 inch pullback risers laying here also. I ordered the 4 inch first, never put them on because compared to the stock risers, they weren't much different. So I ordered the 6 inch. Ill have to play with it a little. Also ordered a Mustang seat. Maybe I should just go with apes and get it over with. I like the look of the stock bars but my back cant handle it for more than an hour.
#6003
03-02-2012, 10:08 AM
Hey Jim,
New to the conversation on trim rings.. If you have it, what is the part number for your visored trim ring? I got part number 69733-05 and that thing is just too big for the stock headlight on my 2010 Lo. Just sitting it around the headlight The gap at the bottom of the new visored ring almost closes together even being around the bottom tab of the original trim ring. I dont see any way it will fasten tightly. And then, even if the circumference were correct, there is about a half inch gap between the front of the headlight and the back of the new trim ring leaving a void there you could stick your index finger into.
Any help would be appreciated... from anyone!!
Thanks.
New to the conversation on trim rings.. If you have it, what is the part number for your visored trim ring? I got part number 69733-05 and that thing is just too big for the stock headlight on my 2010 Lo. Just sitting it around the headlight The gap at the bottom of the new visored ring almost closes together even being around the bottom tab of the original trim ring. I dont see any way it will fasten tightly. And then, even if the circumference were correct, there is about a half inch gap between the front of the headlight and the back of the new trim ring leaving a void there you could stick your index finger into.
Any help would be appreciated... from anyone!!
Thanks.
Yeah the part number was 69734-05, and like I said, I had it Powdercoated black
#6004
03-02-2012, 10:58 AM
Advanced
Join Date: Nov 2011
Location: S. Florida
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Hello everyone. I have been following this thread since I got My FatBoy Lo in November. There are many nice bikes posted here, and lots of helpful info, so thanks everyone. I have been traveling for work pretty much since I got my Lo, but I am home now, and finally got to do some mods. I still have more to do. Here are some pics.
Last edited by T2K5; 03-02-2012 at 11:02 AM.
#6005
03-02-2012, 11:11 AM
#6007
03-02-2012, 11:29 AM
Road Captain
Join Date: May 2011
Location: Bama
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
#6008
03-02-2012, 11:39 AM
Advanced
Join Date: Nov 2011
Location: S. Florida
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. The bars are Carlini 17" Evil Apes. I had the dealer install the apes while I was traveling, and plan on moving or deleting the turn signals. I am still trying to figure out what I want to do, I really want to remove the turn signals, but do not want any dash lights to come on.
Last edited by T2K5; 03-02-2012 at 11:42 AM.
#6009
03-02-2012, 01:39 PM
2nd Gear
Join Date: Mar 2012
Location: Springfield,IL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
#6010
03-02-2012, 02:08 PM
Advanced
Join Date: Nov 2011
Location: S. Florida
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Welcome. I changed the headlight on my FatBoy Lo to the HD L.E.D. light, but I changed everything to the 5 3/4" version. I have not run it yet, still waiting for my tail light to arrive. I will let you know in a couple of days.