Calling all FatBoy Lo Owners
#5621
02-03-2012 | 05:10 PM
Cruiser
Joined: Jun 2011
Posts: 104
Likes: 0
From: DFW, TX
Ok Jim I hate you. I really like the way the gloss black parts look and my bike is kind of evolving like everyone else. That being said, I think I am going to change my wrinkle black covers out for gloss black so I will have some for sale. O really like the contrast between the denim gloss and chrome like my bike already is. Damn you haha.
I was thinking the same thing. But I also remember some new black lines and AN fittings that became available in the last few years that weren't very expensive. I'll have to call a buddy of mine that owns a performance shop and see what those are.
#5622
02-03-2012 | 05:26 PM
Extreme HDF Member
Joined: Oct 2011
Posts: 11,609
Likes: 7,084
From: SoCal / AZ
I got the signal mounts figured out using some all thread and a couple nuts. I am moving them to the lower bolt holes on the upper fork cover. What have you guys that have done this before done with the wiring? I am thinking of drilling through the cover and use a small rubber wire gromet (sp) right behind the hole where the all thread will go. I have seen some other applications where they use hollow studs to run the wires, but the mounting hole runs flush up to the forks so the wire wont fit through there.
#5623
02-03-2012 | 06:33 PM
If you are serious about taking the wrinkle black pieces off let me know, I'm about to either PC mine or buy new ones.
I was thinking the same thing. But I also remember some new black lines and AN fittings that became available in the last few years that weren't very expensive. I'll have to call a buddy of mine that owns a performance shop and see what those are.
I was thinking the same thing. But I also remember some new black lines and AN fittings that became available in the last few years that weren't very expensive. I'll have to call a buddy of mine that owns a performance shop and see what those are.
#5624
02-03-2012 | 09:13 PM
Stage IV
Joined: Jan 2012
Posts: 4
Likes: 0
From: Detroit
That's the Kuryakyn Laydown License plate bracket.. they make one as part of their "black" line now too.. though I got the Chrome before they started that.. and with regards to the V&H BSS's.. here's a video of them on my bike..
Annnd.. if you're interested in them, especially since you have a 2010, and I have a 2010, they ARE for sale because i'm replacing them with a different exhaust. only 1500 miles through them and are in very good shape. Soo..let me know if you're interested and maybe we can haggle something (if those are something you'd choose to go with)
Annnd.. if you're interested in them, especially since you have a 2010, and I have a 2010, they ARE for sale because i'm replacing them with a different exhaust. only 1500 miles through them and are in very good shape. Soo..let me know if you're interested and maybe we can haggle something (if those are something you'd choose to go with)
Do you have your new exhaust or are you waiting on it? It may not be too long before I'm looking. Send me an email with what you want for them maybe I will change my mind on waiting! Rjohnson@worldoferhard.com
Thanks!
#5625
02-03-2012 | 09:17 PM
Stellar HDF Member
Joined: Feb 2011
Posts: 3,048
Likes: 2
From: Central Jersey
