Good call, like was said above the dealer download stays within EPA standards and does not address timing. My PV has been great.

 

Captain...a little late ,but i hope this helps.....2011 lo with a c&c solo seat and there`s a run brake module in there some where also....oh and a PCV...

 

Greetings from Germany.
I've enjoyed this forum over month, learned so much from you guys.
Now, that there are only two weeks left before delivery of my 2012 denim lo one question is still open:
I would like to put on a screaming eagle II exhaust. Can somebody be so kind to tell me the OEM part number?
Best regards, Chris
Beeing deployed to Afghanistan at present

 

ahh Guten Tag. Sind sie Deutscher oder Amerikanischer? I would guess you're American stationed in Deutschland. neat. Anyways, I believe the SEII shotgun slip-on mufflers are part number 80444-03.. although the black SE Performance Slip-Ons for 2012s (Im quite sure both will fit just fine) is part number 80621-12

 

Dealer dload is not what you what to do! I've provided a link below that is almost addictive as the Lo thread. You have to pay to play. I'm just about half way there and its fun.
https://www.hdforums.com/forum/elect...ml#post9317507

 

Hi Mates
I just fitted 6" pullback risers to My Fatboy as the 4" pullbacks just didnt cut it & it looks like Im going to have to take the bike to the dealer & have a longer brake-line fitted & to reset the ABS as the line thats on there now gets a bit tight when at full lock to the left.
If I ask the dealer to put a long enough Brake-line on so if I decide to change the bars to street slammers will I be able to change the bars then without disconnecting the ABS is it just the brakeline or is there an electrical connection as well involved.
Also are the street slammers any further back than the 6" pullback risers as looking at the bike they look almost like chrome street slammers now.

Cheers
Rick

 

@Sgt_Jim Grüß Gott!
No, I'm a german guy. We've some troops down in the sand as well.

Tank you for your replay. Are you sure about the 80444-03? They have a different look. Or can I simple cut off the crossover tubing?

Thanks again

 

Well there's also P/N 80445-03 ..for the SEII's those are the only two numbers I could find.. I don't know how much of the stock exhaust they replace, but keeping in mind the stock exhaust also has a cross-over pipe on them... do you have an image you could post of which ones you were looking for?

 

@ Fatboy Todd,

Thanks for the link!!! I have spent a couple of hours on the thread and the information provided is very helpful. Thanks again.

 

For all you Lo brothas... i was thinkin of you guys at the beach today...
This was a Lo with upswept tails at Neptunes Malibu!!