Dave, I was running a C&C solo with the PCV and had no issues. In fact, I had the AT modules under there as well. There is more room under my C&C than there was under the stock seat. Don't know on the newer bikes, but on mine there is a little recessed area on the battery between the terminals up by where all the frame grounds are (where the backbone starts) and the PCV tucked right in there. Pretty much made it flush with the top of the battery. Just have to get creative with the wire routing. What's more difficult is where it plugs into the ECM. DJ wants you to turn the ECM sideways and velcro it on so you have room for the extra ECM plug and wiring. There are some posts on here somewhere about that, you'll want to find them when you get home and get to work on the scoot.
Thanks Bill! That helps ease my mind a little. I will check up on those posts for re-mounting the ECM and hooking the PCV up. I definitely want there to be plenty of space. So I will have to pick up some double sided tape or some velcro with an adhesive backing, correct?
what license plate bracket is that? Id like to see a photo from the back.
Got it from V-Twin. I think I believe its called LED Diamond. It came chrome, so I had it powdercoated. I got a can of that lens tint stuff and sprayed the lenses black. Kinda ghetto but it was worth a shot.
Thanks Bill! That helps ease my mind a little. I will check up on those posts for re-mounting the ECM and hooking the PCV up. I definitely want there to be plenty of space. So I will have to pick up some double sided tape or some velcro with an adhesive backing, correct?
Yeah, just run by the store and get some 3M velcro. A small roll will do. You don't have to follow DJ's directions exactly, just have to do what works.
Yeah, just run by the store and get some 3M velcro. A small roll will do. You don't have to follow DJ's directions exactly, just have to do what works.
Fuelmoto also has a good set of instructions for the PCV and the Auto tune add on. Here is a link. That is how I mounted my PCV. BTW you won't have much of space under there when done.
Fuelmoto also has a good set of instructions for the PCV and the Auto tune add on. Here is a link. That is how I mounted my PCV. BTW you won't have much of space under there when done.
hell, you should try it on a Crossbones with the stock seat and frame cover set up. You got to cut all kinds of crap....