Calling all FatBoy Lo Owners
#4861
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Ya I was going to relocate them when I changed my bars. I have the service manual but I don't know dick about reading the wire diagrams. I hate to put the bike in the shop if I can help it. I only have so much time home, just 3-4 days every month or two. And that time I better spent riding or doing my own work. When you get a chance take a look at your hand controls and see if you can see where the shop might have just cut them off. I think there might be some plugs under the tank for the optional aux light and those are used for the signals as well.
#4862
#4867
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Man, that looks nice! Now, don't take this the wrong way, but why not go ahead and do the RSD rocker boxes or the black front axle nut covers? You already did the RSD timing cover and derby cover. Either way, it looks bad ***. I am really diggin' those pipes!
Last edited by CaptainMorgan_SOS; 11-27-2011 at 10:35 AM.
#4868
#4869
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Fits '07-later FLSTC, FLSTN and '08-later FLSTF and FLSTFB models. '07 models require separate purchase of Screw P/N 4042 (qty 2) and Washer P/N 7062 (qty 2). #48645-09"
#4870
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
They do, but you can buy a pair that were powdercoated a lot cheaper on ebay (thats what I did) or, if you are patient, pull yours and send them out for powdercoating. Its less expensive.