Calling all FatBoy Lo Owners
#2611
05-19-2011 | 04:44 PM
Road Master
Joined: Aug 2010
Posts: 950
Likes: 19
From: Southcentral, OK
Finally took delivery 2011 FBL Vivid Black w/ABS...How she looks now...
I'm waiting on a Speedo Visor ring and Headlight Visor ring that are getting PC'ed red and red SE spark plug wires...debating on some sort of black engine guard...and for it to stop raining so I can break this baby in...
I'm waiting on a Speedo Visor ring and Headlight Visor ring that are getting PC'ed red and red SE spark plug wires...debating on some sort of black engine guard...and for it to stop raining so I can break this baby in...
M
#2612
05-19-2011 | 06:43 PM
Advanced
Joined: Jul 2008
Posts: 58
Likes: 0
Yeah I like it a lot...though I have yet to have it on the highway...it takes the wind off of your chest...won't use it for short trips but on the long ones it's going to be nice...
#2614
05-19-2011 | 09:31 PM
Tourer
Joined: Nov 2010
Posts: 342
Likes: 0
From: South Florida
Not in this thread, only in the solo seat lock thread as mentioned by Kronin. I had the seat, fender bib, and tank cover redone by a local shop who actually redid the interior on a Corvette I used to own. Different owner's now, but same shop.
I wanted to break up the black a little bit. The use of the female stingrays for the fender bib and tank cover was a last minute impulse decision though I had considered male stingray for the seat itself. I just figured if I didn't like the female pieces, I could change them out easy enough.
Attached are a few photos: seat, fender bib, bike, and a photo from last night at one of the local bars. It was slow last night, but we had a lot of rain yesterday which is unusual for this area.
I wanted to break up the black a little bit. The use of the female stingrays for the fender bib and tank cover was a last minute impulse decision though I had considered male stingray for the seat itself. I just figured if I didn't like the female pieces, I could change them out easy enough.
Attached are a few photos: seat, fender bib, bike, and a photo from last night at one of the local bars. It was slow last night, but we had a lot of rain yesterday which is unusual for this area.
My buddy is checking to make sure ths gator guy has a source for prepping the skin properly.
Welcome to all of the new guys with Lo's.
My PowerVision arrives tomorrow so the RSD a/c goes on soon too!
#2615
05-19-2011 | 09:44 PM
Road Master
Joined: Apr 2010
Posts: 1,216
Likes: 79
Not in this thread, only in the solo seat lock thread as mentioned by Kronin. I had the seat, fender bib, and tank cover redone by a local shop who actually redid the interior on a Corvette I used to own. Different owner's now, but same shop.
I wanted to break up the black a little bit. The use of the female stingrays for the fender bib and tank cover was a last minute impulse decision though I had considered male stingray for the seat itself. I just figured if I didn't like the female pieces, I could change them out easy enough.
Attached are a few photos: seat, fender bib, bike, and a photo from last night at one of the local bars. It was slow last night, but we had a lot of rain yesterday which is unusual for this area.
I wanted to break up the black a little bit. The use of the female stingrays for the fender bib and tank cover was a last minute impulse decision though I had considered male stingray for the seat itself. I just figured if I didn't like the female pieces, I could change them out easy enough.
Attached are a few photos: seat, fender bib, bike, and a photo from last night at one of the local bars. It was slow last night, but we had a lot of rain yesterday which is unusual for this area.
#2616
05-19-2011 | 10:43 PM
You can remove fender wheel caliper it's not that bad I taped and wraped bike I have another set of lowers (going to have pc ) but after reading a thread on here about some rattle canning there I figured the only real thing iv got to loose is a little money and time I put 5 coats on and put a heater between the forks for about a hour they turned out great my buddies had no idea I didn't pc
#2618
05-20-2011 | 07:51 AM
Say Hello and a question...!!
First of all to say hi and i dont know if a have to bring beers or something, but you are invited guys...
I have a question:
Im a very proud owner of a FLSTFB 2010 and im interested in lowering que beast, my fat boy lo its a (special) they call it like that in Europe, but when im looking at the front lowerin kit "54758-07" they say if your bike its european you have to buy "54001-04A" also...
Anybody knows if that its correct...?
Thanks
I have a question:
Im a very proud owner of a FLSTFB 2010 and im interested in lowering que beast, my fat boy lo its a (special) they call it like that in Europe, but when im looking at the front lowerin kit "54758-07" they say if your bike its european you have to buy "54001-04A" also...
Anybody knows if that its correct...?
Thanks
#2620
05-20-2011 | 10:18 AM
Advanced
Joined: Jul 2008
Posts: 58
Likes: 0
I just got the Falcon Bag looks well made...But have not had a chance to use it...I got it for Laconia...Really don't know how much it will hold...but I'm not big w/saddlebags on a Lo...