Calling all FatBoy Lo Owners
12-19-2015 | 03:13 PM
Devil's Advocate
Joined: Jun 2010
Posts: 2,070
Likes: 36
From: Alberta, Canada
12-19-2015 | 11:18 PM
Intermediate
Joined: Sep 2015
Posts: 32
Likes: 3
From: HuntsVegas
driving myself nuts. i'm just about done with the mods. going to change the spark plug wires to blue, will eventually find the right linkage rod and find the right axle nut covers.. but with all my bikes i've had atleast one if not a few skulls on it. i love the skull on the crossbones on the oil tank, i'm thinking the oil tank as being my canvas. but i'm nervous about putting something. don't want to just put something there for the sake of doing it..either find a harley decal of the number 1 with a skull in it or just finding a cool skull..ugh..opinions welcome on this issue
12-20-2015 | 12:00 AM
Seasoned HDF Member
Joined: Aug 2015
Posts: 10,355
Likes: 515
From: Southern Arizona
saw some from kuryakyn but they're chrome and i would have to paint them. but i like things to look like they go together, so i will probably go with the ones from harley. you just made my mind up, thanks. i know this guy ain't to popular among bikers but choppers inc has one with bullet caps on top and it's black. though i did find a guy on ebay who makes a custom cut air breather face for 45 bucks. could get a skull but may do something else.
http://www.ebay.com/itm/141745827619...%3AMEBIDX%3AIT
http://www.ebay.com/itm/141745827619...%3AMEBIDX%3AIT
12-20-2015 | 01:11 PM
Road Captain
Joined: May 2007
Posts: 735
Likes: 30
From: Orlando, FL
I need to figure out if I'm okay with the extra width that comes with them. On the Gangster 16's the 1.5's are 41" wide compared to 36.5" for the 1.25's. That sounds really wide, but I am a big son of a bitch so I'd probably be okay with it.
12-20-2015 | 02:46 PM
Seasoned HDF Member
Joined: Aug 2015
Posts: 10,355
Likes: 515
From: Southern Arizona
12-22-2015 | 09:33 AM
Seasoned HDF Member
Joined: Aug 2015
Posts: 10,355
Likes: 515
From: Southern Arizona
12-22-2015 | 01:38 PM
Road Captain
Joined: May 2007
Posts: 735
Likes: 30
From: Orlando, FL
I love the flush mount caps. I wish you could get them with just a dummy for the left side since I have the tach/speedo combo which has its own fuel gauge. Seems kind of redundant to have both. I think there's some aftermarket ones, but they don't seem to look as "right" as the Harley set.
12-22-2015 | 01:42 PM
Road Captain
Joined: May 2007
Posts: 735
Likes: 30
From: Orlando, FL
Update on my bike is that all of the parts to fix it are supposedly on order. I know shipping will get delayed a bit with Christmas so I'm not really expecting to see my bike again before 2016.
I'm still swaying back and forth on the apes, but most likely I will go ahead and order the 16" Gangsters before long. I'm 6'3" and if you measure my arm span tip to tip it's 6'6", so I don't think the width or the height will be any issue.
I'm still swaying back and forth on the apes, but most likely I will go ahead and order the 16" Gangsters before long. I'm 6'3" and if you measure my arm span tip to tip it's 6'6", so I don't think the width or the height will be any issue.
12-22-2015 | 01:50 PM
Seasoned HDF Member
Joined: Aug 2015
Posts: 10,355
Likes: 515
From: Southern Arizona
I love the flush mount caps. I wish you could get them with just a dummy for the left side since I have the tach/speedo combo which has its own fuel gauge. Seems kind of redundant to have both. I think there's some aftermarket ones, but they don't seem to look as "right" as the Harley set.
the answer to your prayers.
http://www.ebay.com/itm/BLACK-POP-UP...dWCVk2&vxp=mtr