Side plates for detach sissybar on 07 Fatboy
#1
Side plates for detach sissybar on 07 Fatboy
Hey guys, Well the Fatboy is done !!!!!!!!!!!!!!!!! Got my Heritage bags installed and it looks AWSOME!. only one prob. they (HD) had to remove my quick detach sissy bar. I looked through the parts catalong lastnight, yet I could'nt find a detach sissybar side plate for a Heritage. My docking posts for my Fatboy, where 9 and a quart apart .. 1st and rear bolt on strut. Well sense they had to install the missing bolt on my strut (which is a setup as on a Heritage) I can't put the Fatboy side plates back on. This was lastnight (01/14/10) So I haven't gotten a chance to check online, This was the first place I came too. ( To ask the Bikers). I will get the new pics up in the next day or too.
Last edited by ski917; 01-16-2010 at 07:12 AM.
#2
heres what I put on my 07, heritage.
http://www.harley-davidson.com/dwp/g...bmLocale=en_US
plus U'll.. need the docking hardware..
Duh.... I just remembered Ur's has the 200 rear.. now not sure.....Well I just looked again at the fitmemt and it says its for the FB.. ??? just have to see.
http://www.harley-davidson.com/dwp/g...bmLocale=en_US
plus U'll.. need the docking hardware..
Duh.... I just remembered Ur's has the 200 rear.. now not sure.....Well I just looked again at the fitmemt and it says its for the FB.. ??? just have to see.
Last edited by oct1949; 01-15-2010 at 08:55 AM. Reason: added more
#3
#4
I went and looked at mine to make sure.. the picture in the one link above must be for the 53810-00 cause the 53815-00 has a slot for the middle bolt thats for the Heritage bags.
Mine the 53815-00 has a notch about 6inn from the front that allow it to fit over the middle bolt... the book doesn't show the slot but if U check it out at the dealer parts U'll see it should work for U...
I've looked all over the web and so far they only show them without the slot for the middle bolt.
Heres a link from Latus and it says it for the Heritage bags.. so it would have to have the slot in it to fit them even if it doesn't show it..
http://www.latus-harley-davidson.com...tachable-3.htm
I looked at the box mine came in again and its for sure is the 53815-00 even the box doesn't show the slots either...
That picture used on for the 53815-00 that I've seen would confuse anyone looking for one with the slots for the Heritage bags because none of them show it having the slot.
Heres some pics for U to see....Thought this would clear things up and help ya...sorry for the thumb prints on it.. put thick coat of wax on them for winter and didn't wipe them off real good yet..
Mine the 53815-00 has a notch about 6inn from the front that allow it to fit over the middle bolt... the book doesn't show the slot but if U check it out at the dealer parts U'll see it should work for U...
I've looked all over the web and so far they only show them without the slot for the middle bolt.
Heres a link from Latus and it says it for the Heritage bags.. so it would have to have the slot in it to fit them even if it doesn't show it..
http://www.latus-harley-davidson.com...tachable-3.htm
I looked at the box mine came in again and its for sure is the 53815-00 even the box doesn't show the slots either...
That picture used on for the 53815-00 that I've seen would confuse anyone looking for one with the slots for the Heritage bags because none of them show it having the slot.
Heres some pics for U to see....Thought this would clear things up and help ya...sorry for the thumb prints on it.. put thick coat of wax on them for winter and didn't wipe them off real good yet..
Last edited by oct1949; 02-14-2018 at 03:54 AM.
#5
#6
#7
Weird, but not surprisingly ....Hate to have to cut the others. probably really messed up the chrome..