Damn Tins, Whats up with the 08's?
#12
Here ya go. I posted some pics here of what I did to fix this problem.
https://www.hdforums.com/forum/softa...fi-models.html
As for using the same lid. Yes it can be used, although the lid might have a different part # it uses the same gasket. The reason its a different part # is because the 06 piece has a tab that holds the pump and the 08 part # doesnt have the tab because everything is held by the bracket that is welded inside the tank.
Tip: Regardless of which way you end up going, make sure you replace the 10 screws that hold that cover in place. they have a small o ring that keeps it from leaking.
Good luck ...
https://www.hdforums.com/forum/softa...fi-models.html
As for using the same lid. Yes it can be used, although the lid might have a different part # it uses the same gasket. The reason its a different part # is because the 06 piece has a tab that holds the pump and the 08 part # doesnt have the tab because everything is held by the bracket that is welded inside the tank.
Tip: Regardless of which way you end up going, make sure you replace the 10 screws that hold that cover in place. they have a small o ring that keeps it from leaking.
Good luck ...
#13
#14
Thanks man, I guess I just did it because the bike is an 08 with less than 1500 miles on it, I wanted to keep it as OE as possible.
If it stops working, then oh well, I use my odometer also.
If it stops working, then oh well, I use my odometer also.
#15
Ok guys heres an update of what I plan to do. I have purchased the tank and fender set off of a 08 night train in black pearl. What I am going to do is mount the 08 tank with the 06 top plate, but I will leave the fuel sender unit out. I also plan to purchased a pop-up flush mount gas cap along with a dummy matching cap for the fuel gauge. I will remove the gauge also and use my odometer to know when its time to fill up. I will post some pictures of the bike when it is finished. I also have a set of 06/07 tins in vivid black in excellent shape if anyone is interested.
#16
Ok Boys,
Broke down and installed 08 peral black tins on the bike. Looks sweet as hell. Everything lined up. I ended up removing the fuel gauge and replacing it with a set of ness chrome pointed gas caps and dummy cap for the fuel gauge. I will have some pictures posted as soon as I have my new rear wheel installed. Happy Holidays
Broke down and installed 08 peral black tins on the bike. Looks sweet as hell. Everything lined up. I ended up removing the fuel gauge and replacing it with a set of ness chrome pointed gas caps and dummy cap for the fuel gauge. I will have some pictures posted as soon as I have my new rear wheel installed. Happy Holidays
Thread
Thread Starter
Forum
Replies
Last Post
Rivithead8
Ignition/Tuner/ECM/Fuel Injection
10
09-06-2014 06:43 PM
07crazytrain
Exhaust System Topics
0
11-04-2008 11:58 AM