Converting EFI tank to a carb model?
#1
#3
You wil also need the top plate that the fuel pump and gauge sending unit are attached too or its gonna leak real bad.
You'll also need to install a new gauge sending unit, assuming you want the gas gauge to work.
Personally, I would save a buck or two and not bother with it. I have yet to see one that was even half way accurate so I gave up using them a long time ago. I found the trip meter is far more reliable.
You'll also need to install a new gauge sending unit, assuming you want the gas gauge to work.
Personally, I would save a buck or two and not bother with it. I have yet to see one that was even half way accurate so I gave up using them a long time ago. I found the trip meter is far more reliable.
#4
Pretty easy and straight forward replacement. Go for it!
#6
#8
Here are the links, I've found that will likely be of help (good luck):
Pingel: http://www.pingelonline.com/carburet...conversion.asp
Amazon:
Pingel: http://www.pingelonline.com/carburet...conversion.asp
Amazon:
Last edited by branchhill; 01-22-2018 at 12:00 PM.
#9
same here
I have the same deal. I did get new tin that was an EFI style but is marked Carb on the top plate. It has a petcock. However there is a plug on the top plate as well which I dont know what it goes to. Assuming it is to a sending unit. The gauge tube is not like my 01 so i also assume its for a digital style. What gage would work.
My bike is an 01 Heritage Softail and had not plate on the tank. I am assuming this newer tank should work but figuring out the fuel gage is an issue.
Top plate newer tank
My bike is an 01 Heritage Softail and had not plate on the tank. I am assuming this newer tank should work but figuring out the fuel gage is an issue.
Top plate newer tank
#10
same here
I have the same deal. I did get new tin that was an EFI style but is marked Carb on the top plate. It has a petcock. However there is a plug on the top plate as well which I dont know what it goes to. Assuming it is to a sending unit. The gauge tube is not like my 01 so i also assume its for a digital style. What gage would work.
My bike is an 01 Heritage Softail and had not plate on the tank. I am assuming this newer tank should work but figuring out the fuel gage is an issue.
My bike is an 01 Heritage Softail and had not plate on the tank. I am assuming this newer tank should work but figuring out the fuel gage is an issue.