I got bored yesterday so I went to a hardware store and I got staff for a lollipop baffles put them together and me and the wife went for a ride,I must say that over no baffles those give some increase in low end power,here is some pictures ,cost me 5$ for everything......

 

ok what did you buy and how did you make them ??
pic just looks like a bolt on your ex pipe..

 

nice fix...they look kind of like thunder city's monster baffles...but alot cheaper

 

i'd like to know how he made them also

 

One more for an explanation.... What did it do to your sound?

 

O.K guys I just went out and take one out to take a good pic,this is nothing but:
(1) 1/4 20 eye bolt
(2) 1inch washers with 1/4 inch holes
(1) 1/4 inch bolt and nut to sandwich the washers on the eye bolt
(2) 1/4 inch nuts to tight the assembled lollipop baffles to the pipe
(1)luck 1/4inch washer I put this one on the outside b-tween pipe and nut to tight the lollipop.
that is all take look at the pic nothing to it....
just go to your local hardware store and assembly the baffle there you'll know what you need.....
good luck.
I'll make some sound clips this afternoon if nothing come up more important....

 

let me know if you need more info...

 

Here's what it is & what it will do for pipes with no baffles...

www.nightrider.com/biketech/exhaust.htm

hope it helps...

 

yes as I said definitely helped in a lower rpm.....and also bike sounds dipper....

 

So putting a 1" disc in the middle of a straight thru, 3 or 4", pipe is going to increase back pressure enough to increase torque???