Installed new tri-bar tail light
#22
#24
Not the best pics, it tends to screw up the cameras photo sensor, but its what I got.
Running lights on in the garage.
And with the Brake light on;
Guys who have been behind me tell me its damn near too bright.
But it does get your attention and that's the important part as far as I'm concerned.
Funny thing is that since I converted the turn signals to brake/turn functions and installed LED bulbs the back of the bike looks like a cop car or fire truck when I hit the brakes.
Somehow I screwed something up or messed up the logic circuits in the HD run/brake/turn module when I changed the wiring in it to turn/brake only and now if I'm stopped with a turn signal on.
The Tri-Bar and one turn signal blink while the other turn stays off.
If I put the brakes on the Tri-Bar and one turn stays on bright while the turning side blinks.
Its not 'supposed' to work that way, but I think I like it better as its a lot more visible in day light.
Running lights on in the garage.
And with the Brake light on;
Guys who have been behind me tell me its damn near too bright.
But it does get your attention and that's the important part as far as I'm concerned.
Funny thing is that since I converted the turn signals to brake/turn functions and installed LED bulbs the back of the bike looks like a cop car or fire truck when I hit the brakes.
Somehow I screwed something up or messed up the logic circuits in the HD run/brake/turn module when I changed the wiring in it to turn/brake only and now if I'm stopped with a turn signal on.
The Tri-Bar and one turn signal blink while the other turn stays off.
If I put the brakes on the Tri-Bar and one turn stays on bright while the turning side blinks.
Its not 'supposed' to work that way, but I think I like it better as its a lot more visible in day light.
Last edited by In Memoriam Citoriplus; 02-11-2012 at 11:30 AM.
#27
I haven't taken one apart (its way too damn expensive to experiment on) but if I had to guess once you got it open all you would find is a circuit board full of LED's and the load resistors needed to operate them.
#29
I know this post is over 2 years old but I have an 02 Train I want to get one for. You ever get the tri or something else?