KURYAKYN MARK 3 or MARK 4?
#32
If your using an HD after market brake pedal... take it off. Use the outter most edge as a template and set it on the pedal mount. Draw a line and cut with a dremel. This way when you put the pedal back on it will contour to the new cut. The pedal's hole is a slot so you will have no porblem sliding it over to the left the distance that you have cut the mount. The harley goodies help also. Lastly, if your not bothered by it, when you attach the Mark III's to the floorboard you can drill the front hole a little wider for some play. This way you can slide the arm a little more to the left and away from the brake pedal. It angles the footrest toward you a bit as well.
#33
Join Date: Oct 2007
Location: The High Desert, SoCal
Posts: 1,077
Likes: 0
Received 1 Like
on
1 Post
No problem. After I drilled the hole to size I just kind of let the drill bit ride against the side of the hole to stretch it just a little. No need to make the entire hole bigger.just the outer side of it...I should have clarified that.
#35
Thread
Thread Starter
Forum
Replies
Last Post