"DYNO" Numbers For SOFTAILS
#1
"DYNO" Numbers For SOFTAILS
POST your (DYNO SHEET [preferred]) or NUMBERS) for Ur softail?
Looking for DYNO sheets or numbers on different builds to help make a decision when choosing pipes and cams. might find one like Ur thinking in here.
Touring area also has a DYNO thread ( ITS FOR BAGGERS )!
(INCLUDE) --- YR; MOTOR; CAMS; PIPES; DYNO numbers-before and after?; (STATE if DYNO was SAE or STD), other info.
Thumbnails of my dynos,-- with Andrews 26H's (80HP/92TQ)--- base run on 96''er average 58HP and 75# TQ. Sheet below With Stg-1 installed, But before Dyno tuned which I got 63hp/78.8Tq---(Both are SAE corrected) So just the Rush pipes got 5 more HP and 3# of TQ.
Cams and Stg-1 added 22 HP and 17# of tq over stock motor. 58hp/75tq VS 80hp/92tq....
update on the andrews 26H cams in post # 88 in this thread..........
Looking for DYNO sheets or numbers on different builds to help make a decision when choosing pipes and cams. might find one like Ur thinking in here.
Touring area also has a DYNO thread ( ITS FOR BAGGERS )!
(INCLUDE) --- YR; MOTOR; CAMS; PIPES; DYNO numbers-before and after?; (STATE if DYNO was SAE or STD), other info.
Thumbnails of my dynos,-- with Andrews 26H's (80HP/92TQ)--- base run on 96''er average 58HP and 75# TQ. Sheet below With Stg-1 installed, But before Dyno tuned which I got 63hp/78.8Tq---(Both are SAE corrected) So just the Rush pipes got 5 more HP and 3# of TQ.
Cams and Stg-1 added 22 HP and 17# of tq over stock motor. 58hp/75tq VS 80hp/92tq....
update on the andrews 26H cams in post # 88 in this thread..........
Last edited by oct1949; 02-14-2018 at 03:59 AM.
#3
#5
Here's mine....for now........
2007 FXST,
103" w/ SE255 cams,
Stock Heads
V&H Big Radius,
SE Heavy Breather,
PCIII,
84 HP, 104 lbs TQ.
.......Getting torn down again this winter to add R&R Stage IV Heads, R&R 615 cams, SE Cam Plate, Rev Perf Roller Rockers, GMR Push Rods.....Should be a nice improvement.
2007 FXST,
103" w/ SE255 cams,
Stock Heads
V&H Big Radius,
SE Heavy Breather,
PCIII,
84 HP, 104 lbs TQ.
.......Getting torn down again this winter to add R&R Stage IV Heads, R&R 615 cams, SE Cam Plate, Rev Perf Roller Rockers, GMR Push Rods.....Should be a nice improvement.
The following users liked this post:
slonez_sg (04-09-2024)
#7
Trending Topics
#8