2006 FXSTBI
95" - HTCC CNC Heads and Pistons - 10.5:1 Comp
SE 260 Cams - 50mm TB - 150% Injectors
JBV Guppy Exhuast
120.62 HP 109.13 TQ

 

I'm more of a reliability guy when it comes to my bikes. So if ever decided to add more performance to my 96" 1584cc Crossbones I'd probably have to decide between an SE 103 build or FM 107 build. I think either one of those with the right set of Cams and tune would be the ticket for more performance and staying in the good reliability range.

Any other builds that would be better?

 

Had my 2019 FLFBS 114 Dyno'd this morning - wanted to get a baseline before doing upgrades.
The bike is standard apart from Screamin' Eagle mufflers and an FP4 tune.

Max. Power 82.12 hp; Max. Torque 113.62 ft-lbs

 

'05 FXSTD, 98", Kury 57mm T/B, Cyclerama 595G cams, headwork, Bassani Prostreets.

 

'18 Street Bob 107, 2-1 exhaust, S&S 475c cam, stock airfilter
100 hp / 110 ft-lbs

 

2019 FLHCS, S&S128, S&S 540 cam, Tman no loss air cleaner, 1st Gen SE CNC heads, 64mm TB, 64 SE CNC manifold, D&D Fatcat exhaust.

 

S&S110 power package with 585cams 58mm throttle hog S&S 5.3 injectors 89cc heads .030 head gaskets basanni road rage 2:1 Thundermax ecu BDL 2 3/4 open belt 30t tranny 70t rear

 

2020 Softail Standard S&S 475, Arlen ness big sucker, Big radius decatted and cut to 5 inches with BCT baffles. Had to upgrade clutch springs.