"DYNO" Numbers For SOFTAILS
#1351
2013 Fat Boy Lo
Still working on it at this point S.E. Heavy Breather, Stage 2+ heads, 1.9 &16 Valves, .650 springs, S&S push rods & lifters, Combustion chambers reduced to 83.5 cc to obtain 11:1 compression, intake opened up to 1.8 (with ramps) for the 55MM HPI throttle body with Fueling 4.9 injectors, 107" cylinders with Carrillo pistons, Fueling .594 reaper cams,V&H Pro Pipe with a modified baffle,Barnett performance clutch, AIM variable pressure plate, Power
yup it is a hand full for a FAT ****!!
just put 30 fat spokes on it with twista front spokes
Both my Scoots
The Dark Knight (FAT LO)
The White Knight (Mr. Springer)
Vision Tune.
just put 30 fat spokes on it with twista front spokes
Both my Scoots
The Dark Knight (FAT LO)
The White Knight (Mr. Springer)
Vision Tune.
#1352
Still working on it at this point S.E. Heavy Breather, Stage 2+ heads, 1.9 &16 Valves, .650 springs, S&S push rods & lifters, Combustion chambers reduced to 83.5 cc to obtain 11:1 compression, intake opened up to 1.8 (with ramps) for the 55MM HPI throttle body with Fueling 4.9 injectors, 107" cylinders with Carrillo pistons, Fueling .594 reaper cams,V&H Pro Pipe with a modified baffle,Barnett performance clutch, AIM variable pressure plate, Power
yup it is a hand full for a FAT ****!!
just put 30 fat spokes on it with twista front spokes
Both my Scoots
The Dark Knight (FAT LO)
The White Knight (Mr. Springer)
Vision Tune.
just put 30 fat spokes on it with twista front spokes
Both my Scoots
The Dark Knight (FAT LO)
The White Knight (Mr. Springer)
Vision Tune.
Can you tell me how you are managing with the right-hand bends, I seem to be scraping the road before my floorboards
#1353
#1354
#1355
#1356
#1357
2016 FLSTFBS +117 kit Dyno Sheet
Just tuned with SEPST (SERT) and 117 kit (injectors, TB, 259E cams, etc) and SE Cam plate with high volume oil pump. Cobra 2-2 exhaust and 58mm backplate added to the stock Ventilator Elite air cleaner. I expected more from this build. Maybe lost too much due to 2-2 vs. 2-1 exhaust? Comments welcome.
#1358
#1360
The following users liked this post:
Donald Mazz Derby (07-31-2018)