"DYNO" Numbers For SOFTAILS
#111
I won't tell you how much I sneaked them off e-bay for and did the install in about an hour. 4 years now and they still look great. I agree with ya, these are really good pipes.
#112
#113
Just got my back from Joe's Cycle Repair.
Actual 130hp/134tq
By kretsebr at 2009-04-07
The boys (Scott and Craig) at Hillside Cycle sure know how to build them.
Actual 130hp/134tq
By kretsebr at 2009-04-07
The boys (Scott and Craig) at Hillside Cycle sure know how to build them.
Do those pipes have the baffles in them?
#114
They had to pull the baffles, for they restricted its performance. I just have to be careful around the leo's, for they really bark now, when you get into it.
#115
I figured they had to yank those baffles. My stage 3 95" ran like it was wet sumping through a set of V&H 2-2's with baffles yet would run out strong with the baffles removed.
By Gawd man you realize what your torque numbers would be if you put a good pipe on that bike?
You swap out that inefficient baffle-less BR 2-2 for a Pro-Pipe or something along those lines?
You are sitting on a beast making power like that through those crummy pipes. Love those Hillside builds!!
By Gawd man you realize what your torque numbers would be if you put a good pipe on that bike?
You swap out that inefficient baffle-less BR 2-2 for a Pro-Pipe or something along those lines?
You are sitting on a beast making power like that through those crummy pipes. Love those Hillside builds!!
#116
question for you bro
Hi
i own a rocker c 2008 like urs i just want to know did u need to put any
additional parts with the SE 203 cams, or you just remove the stock cams and add SE cams i mean without changing the head and the valve? pleas help
i own a rocker c 2008 like urs i just want to know did u need to put any
additional parts with the SE 203 cams, or you just remove the stock cams and add SE cams i mean without changing the head and the valve? pleas help
#117
question for you bro
Hi
i own a rocker c 2008 like urs i just want to know did u need to put any
additional parts with the SE 203 cams, or you just remove the stock cams and add SE cams i mean without changing the head and the valve? please help
i own a rocker c 2008 like urs i just want to know did u need to put any
additional parts with the SE 203 cams, or you just remove the stock cams and add SE cams i mean without changing the head and the valve? please help
#118
Don't quite know what Ur asking, If it is can a person add the cams without anything else?, the answer is YES
If Ur asking if (ThanatosUSMC) got 93hp/111tq with cams only?, the answer is no..
As I have seen hundreds of dynos, my guess would be he probably has at least installed a 103 kit and had some head work with a really good dyno tune to get those #'s,
He did state he installed New parts, just didn't list them
#119