Axle Covers for a 07 Fatboy...
#1
Axle Covers for a 07 Fatboy...
I'm looking to get a set of Rear Axle Covers (now that I changed my pipes and they are more exposed). I'm running into all kinds of problems, the problem being; Non fit!
Even if they say they will fit, they still don't (my local HD Shop has brought in 2 set's now... and still no luck) due to the brake Caliper on the 07's (and maybe also on the 08's). I also contacted Arlen Ness RE: the Torpedo one's they make, they also confirmed that they do not fit, nor do they sell any that will fit.
Has anyone found any covers that will fit an 07 Fatboy? please post pictures or links if you are able to help.
Thanks so much!
Even if they say they will fit, they still don't (my local HD Shop has brought in 2 set's now... and still no luck) due to the brake Caliper on the 07's (and maybe also on the 08's). I also contacted Arlen Ness RE: the Torpedo one's they make, they also confirmed that they do not fit, nor do they sell any that will fit.
Has anyone found any covers that will fit an 07 Fatboy? please post pictures or links if you are able to help.
Thanks so much!
#2
RE: Axle Covers on a 07 Fatboy...
PM sent - I may have some that fit. Pls send your email address to me at fxsti@mac.com and I will reply with a picture.
#3
#4
RE: Axle Covers on a 07 Fatboy...
Thanks WaterHog and OneBlackFly, however I'm hoping to find something like the HD covers that covers the Axle Nuts and the back/part of the swing arm.
Something like
http://shop.arlenness.com/productdet...roduct_ID=7028
or
the HD one;
http://www.harley-davidson.com/gma/g...bmLocale=en_US
Make sense? again, these cover the axle Nuts and then some....
Something like
http://shop.arlenness.com/productdet...roduct_ID=7028
or
the HD one;
http://www.harley-davidson.com/gma/g...bmLocale=en_US
Make sense? again, these cover the axle Nuts and then some....
#6
RE: Axle Covers for a 07 Fatboy...
I have an 07 Fatboy and I put these on, it took alittle effort to get them on but they worked.
[/align]http://www.harley-davidson.com/dwp/gma/dwp_gma_product.jsp?PRODUCT%3C%3Eprd_id=8455244418 39771&FOLDER%3C%3Efolder_id=2534374309229833&a mp;ASSORTMENT%3C%3East_id=2534374309229833&dwp _dealerid=32596&bmUID=1206052514962&bmLoca le=en_US
[IMG]local://upfiles/45014/FB3B0066F6E741538E4AD063021E7F74.jpg[/IMG]
[/align]http://www.harley-davidson.com/dwp/gma/dwp_gma_product.jsp?PRODUCT%3C%3Eprd_id=8455244418 39771&FOLDER%3C%3Efolder_id=2534374309229833&a mp;ASSORTMENT%3C%3East_id=2534374309229833&dwp _dealerid=32596&bmUID=1206052514962&bmLoca le=en_US
[IMG]local://upfiles/45014/FB3B0066F6E741538E4AD063021E7F74.jpg[/IMG]
#7
RE: Axle Covers for a 07 Fatboy...
I bought the HD set # 48109-03A, but haven't tried to install them yet because it looks like thewheel will have to come off in order to move the rear brake bracket. Also, from what I can tell, the new axle adjuster bolt won't fit on the right side due to the tight fit of the brake assembly,so I plan on just using the cover with the stock axle adjuster on the right side. I hope it works....I'm going to wait until the next service and have them do it, since I have no way of removing my wheel and then readjusting everything in my driveway.....
BTW, nice bike 07 J/E FatBoy !
BTW, nice bike 07 J/E FatBoy !
Trending Topics
#8
RE: Axle Covers for a 07 Fatboy...
I will be doing some mods over the next few days including the 48112 shown here, I'll let you know how it goes,
Da Bone
[IMG]local://upfiles/52814/C64AF3055D2E42258827C4603C5CFAA1.jpg[/IMG]
NG Brother, the instructions don't tell ya that the brake caliper frame is in the way on the right side, I tried to use a rubber mallet but still didn't fit down like the left side did..I just ordered the Arlen Ness Torpedo set I hope I have better luck this time.
Bone
Da Bone
[IMG]local://upfiles/52814/C64AF3055D2E42258827C4603C5CFAA1.jpg[/IMG]
NG Brother, the instructions don't tell ya that the brake caliper frame is in the way on the right side, I tried to use a rubber mallet but still didn't fit down like the left side did..I just ordered the Arlen Ness Torpedo set I hope I have better luck this time.
Bone
#9
RE: Axle Covers for a 07 Fatboy...
ORIGINAL: NC Pirate
I bought the HD set # 48109-03A, but haven't tried to install them yet because it looks like thewheel will have to come off in order to move the rear brake bracket. Also, from what I can tell, the new axle adjuster bolt won't fit on the right side due to the tight fit of the brake assembly,so I plan on just using the cover with the stock axle adjuster on the right side. I hope it works....I'm going to wait until the next service and have them do it, since I have no way of removing my wheel and then readjusting everything in my driveway.....
BTW, nice bike 07 J/E FatBoy !
I bought the HD set # 48109-03A, but haven't tried to install them yet because it looks like thewheel will have to come off in order to move the rear brake bracket. Also, from what I can tell, the new axle adjuster bolt won't fit on the right side due to the tight fit of the brake assembly,so I plan on just using the cover with the stock axle adjuster on the right side. I hope it works....I'm going to wait until the next service and have them do it, since I have no way of removing my wheel and then readjusting everything in my driveway.....
BTW, nice bike 07 J/E FatBoy !
#10