2007 fatboy front end
#1
#2
#3
RE: 2007 fatboy front end
Yes mine did that and after 3 times to the dealer they adjusted them where they stayed. I think they just turn the wheel hard left and then hit the bars to put it back. That was only a temporary fix. Then the last time they loosened the risers and adjusted it and it has stayed.
#4
RE: 2007 fatboy front end
I'm glad you made this posting! The last few times I rode my FB it seemed like the bars were slightly turned to one side. I would sit straight and move around in the seat to see if it was just me. I thought I was losing it! I'll definitely have it checked out this spring when I take it into the dealer for inspection.
#5
#6
RE: 2007 fatboy front end
I noticed that on mine, but I'm not too worried about it. I guess this is because when bike is on the sidestand, the wheel turns to the left, and you need to apply a bit more force on the handrebars to straighten it when picking up bike. Maybe not...polly bushings should fix that anyway.
#7
RE: 2007 fatboy front end
Mine are tweaked ever so slightly to the right. I took it to the dealer once right after I bought it.
This monster tech came out, grabbed the bars and yanked them against the fork stop.
Ehh, thats good I told him. They are still slightly off. Some day I will loosen everything up and take care of it.
MikeM
This monster tech came out, grabbed the bars and yanked them against the fork stop.
Ehh, thats good I told him. They are still slightly off. Some day I will loosen everything up and take care of it.
MikeM
Trending Topics
#8
#10
RE: 2007 fatboy front end
I have the same "problem" on my '04 Fatty, but only after I replaced the stock risers with a set of 2 up/2 back. I figured it was just a matter of playing around with it to get it straight, but I never seem to get around to it. I've kind of gotten used to it now. Might do it this spring, before I start riding. Good tip on the poly bushings. Thanks, Citoriplus!