This may be an odd question, but will Heritage body parts (front and rear fenders and gas tank) fit on a Fatboy frame?? I've seen Fatboy front fenders on a Heritage but was unsure if all the body parts were interchangeable.

Thanks,
BK Meyers

 

The tanks are probably the same. As far as the fenders, I think MichaelBarry has a heritage front fender on his fatboy.

 

The front fender will for sure.Here's one on my Fatboy.I'd bet the tank and the rear fender are bolt on items too.Probably the same parts.

 

everything will bolt up just won't have the lights in the fendertips unless you add the wiring

 

Yeah everything will fit. A friend of mine put a stock fatboy front fender on his deluxe

 

Everything will bolt on except the 2007 Fat Boy(wide rear tire). Rear fender is extra wide.

 

Thanks for the info.

BK

 

The only problem you'll run into is with the gas tank. The early (00-01 and maybe the 03)carb tanks are not interchangeable with the FI tanks, like the later models are.I believe the later modelFI tanks will fit the 01 and later FI bikes, along with the04 and later carbbikes.Check with your dealer on the years.

 

I meant to say the 00-01 and maybe the 02, but it's possible the 03 carb tank would not interchange as well. Like I said, check with your dealer.

 

The toughest would be if your heritage tins have the fender lights.. If so, you have some wiring to do to essentially copy the heritage fender wiring harness front and rear.. This means running power down your forks to the front.. also something to consider.

But, if no lights, such as with stock fatboy rear fender or the clean FL front fender, I think you're good..... This I would like to see, by the way.. I've considered it at times myself.. As going to a clean FL front fender is really the only extra part you'd need if not doing fender lights.