Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

Front ends?

Thread Tools
 
Search this Thread
 
  #1  
Old 09-07-2019 | 08:51 PM
Jersey Drew's Avatar
Jersey Drew
Thread Starter
|
Road Warrior
Joined: Aug 2014
Posts: 1,688
Likes: 256
From: NJ
Default Front ends?

Are the triple trees of all softails interchangeable? I have a 2006 custom frame and it seems to be based off of an Evo motor in the old softail shocks. The bike is very raked out and I would like to put a shorter front end on it. So my question is are there any special measurements I have to look out for when ordering new triples?
 
  #2  
Old 09-07-2019 | 08:59 PM
TwiZted Biker's Avatar
TwiZted Biker
Club Member
Joined: Mar 2009
Posts: 65,065
Likes: 49,103
From: Niles Canyon Ca.
Default

Bikes raked out there you need to be real careful about tube length or it'll nose in on you grounding the frame underside, can't get too short in this case. Standard or custom 41mm 1" stem wide glide trees from the evo era will work, nothing on the trees themselves to worry about.
 
  #3  
Old 09-07-2019 | 09:29 PM
Jersey Drew's Avatar
Jersey Drew
Thread Starter
|
Road Warrior
Joined: Aug 2014
Posts: 1,688
Likes: 256
From: NJ
Default

My goal is to swap trees and shocks to bring it into a mor normal rake and length.
 
  #4  
Old 09-07-2019 | 09:37 PM
TwiZted Biker's Avatar
TwiZted Biker
Club Member
Joined: Mar 2009
Posts: 65,065
Likes: 49,103
From: Niles Canyon Ca.
Default

If the frames raked and they are usually stretched a bit too with those custom ones swapping parts alone will not do that for you. Post up a picture with a good side view of the frame sitting level on the ground from a step or two back with a bike or or something in the background for size context and one of us in here can tell you what you have to work with before you get busy spending money.
 
  #5  
Old 09-08-2019 | 01:01 PM
hdbob2006's Avatar
hdbob2006
Stellar HDF Member
Joined: Jan 2013
Posts: 3,466
Likes: 425
From: Illinois
Default

Show us some pictures.How much rake in the trees,and how much rake in the frame?
 
  #6  
Old 09-14-2019 | 09:28 PM
Jersey Drew's Avatar
Jersey Drew
Thread Starter
|
Road Warrior
Joined: Aug 2014
Posts: 1,688
Likes: 256
From: NJ
Default

Here’s a pic
 
  #7  
Old 09-15-2019 | 08:26 AM
back again's Avatar
back again
Seasoned HDF Member
Joined: May 2005
Posts: 10,358
Likes: 6,525
From: Georgia
Default

Not sure your going to get any shorter than you have there without the frame rail bottoming out on most anything. Custom made negative- raked trees or frame neck mod would be the 2 doable changes I see at all. going negative is sure to create trail problems effecting handling. A guy at work has a similar bike that rides and handles really good. Why do you want it shorter ? What is the measurement between the axle and the bottom of the neck itself ?
 
  #8  
Old 09-15-2019 | 09:26 AM
TwiZted Biker's Avatar
TwiZted Biker
Club Member
Joined: Mar 2009
Posts: 65,065
Likes: 49,103
From: Niles Canyon Ca.
Default

Yup nothing you'll do to front end will get what you want. Looks like a 2" stretch and 6 over tubes. Look up the Rocker B & C bikes they are similar.
 
  #9  
Old 09-15-2019 | 07:01 PM
Jersey Drew's Avatar
Jersey Drew
Thread Starter
|
Road Warrior
Joined: Aug 2014
Posts: 1,688
Likes: 256
From: NJ
Default

90% of the riding the bike is OK but slow maneuvers and in a parking lot I think you need about 132 foot turning circle Lol. Plus the bike is really low to the ground so I don’t get that much lean angle on it and turning right is worse than left because of the exhaust and the really crappy rear suspension.
 
  #10  
Old 09-15-2019 | 07:05 PM
showin4fun's Avatar
showin4fun
Tourer
Joined: Nov 2018
Posts: 490
Likes: 119
From: New Brunswick, Canada
Default

Originally Posted by Jersey Drew
90% of the riding the bike is OK but slow maneuvers and in a parking lot I think you need about 132 foot turning circle Lol. Plus the bike is really low to the ground so I don’t get that much lean angle on it and turning right is worse than left because of the exhaust and the really crappy rear suspension.
No doubt raising the rear suspension would help a lot. It looks lowered quite a bit.
 


Quick Reply: Front ends?



All times are GMT -5. The time now is 03:30 AM.