Floorboards for Sport Glide
#51
They felt really good on the way home from work (I swapped them out at work before I left). Probably as good as I'm going to get without going "full floorboard". I can slide my feet back until my heels hang off the back and get a Mid Controls feel. I can also slide my feet forward until just my heels are on the boards and my toes are resting on the engine guards. I need to take them on a long-ish ride (4 hours or so) to test them out before our Colorado trip later this summer.
For reference...a cobbled-together before / after image:
For reference...a cobbled-together before / after image:
#52
These were my first choice a couple months ago...but the adapters were out of stock, and I really wanted to get away from the pegs, so I tried the Joker Machine minis.
#54
Well, after my back order being extended another month, I received my on Wednesday. Finally had a chance to install them today. Only got in a short test ride, but I'm very happy with the results. Really glad I went this route. Thanks again Belloc for the parts list! Made the order and installation simple.
#55
Well, after my back order being extended another month, I received my on Wednesday. Finally had a chance to install them today. Only got in a short test ride, but I'm very happy with the results. Really glad I went this route. Thanks again Belloc for the parts list! Made the order and installation simple.
#58
Is this possible on a '95 FXST frame aswell? I put the aftermarket floorboards but without the dogbones adapters, but still they are a bit to high.
second, I have the rearbrake cilinder with the seperated reservoir (behind the oilfilter), so, I guess a Heritage likeable brakepedal will not fit, because the "lip" (don't know the right name) is upwards on the pedal and with my FXST brakepedal is downwards, so, I have to replace my rear breakcilinder aswell?
Is there any possibility (without welding) to put the FLHS mounting plates on it?
second, I have the rearbrake cilinder with the seperated reservoir (behind the oilfilter), so, I guess a Heritage likeable brakepedal will not fit, because the "lip" (don't know the right name) is upwards on the pedal and with my FXST brakepedal is downwards, so, I have to replace my rear breakcilinder aswell?
Is there any possibility (without welding) to put the FLHS mounting plates on it?
#59
Join Date: Nov 2010
Location: Red Banks, Mississippi
Posts: 17,729
Received 4,198 Likes
on
2,440 Posts
Just saw this thread...
We make Adjustable, full size floorboards to fit the Sport Glide. No need to spend all the $ or work on retrofitting. They can be installed in less than 30 minutes.
Floorboards HERE.
M8 Adapters HERE.
We make Adjustable, full size floorboards to fit the Sport Glide. No need to spend all the $ or work on retrofitting. They can be installed in less than 30 minutes.
Floorboards HERE.
M8 Adapters HERE.
__________________
Win Up to $350.00 Cash from DK Custom This Month, Click HERE to see How!
DKCustomProducts.com
Win Up to $350.00 Cash from DK Custom This Month, Click HERE to see How!
DKCustomProducts.com
The following users liked this post:
GPHDXLC (03-24-2021)
#60