42mm flatside carb
#2
RE: 42mm flatside carb
This one is the Mikuni HSR 42 carb. I have this in my bike (99 FXST) and I love it. The installation is simple and usually your bike will start well in most of the situations after installing it, but you will have to adjust it to work excellently well as it says in the manual.
A great difference in performance compared with the CV carb.
Javi
A great difference in performance compared with the CV carb.
Javi
#3
#5
#7
Trending Topics
#8
RE: 42mm flatside carb
I run the Mikuni 42 on my 05 Dyna, I just instaled a 95 in. big bore kit on her.
And I noticed some odd tuning issues with it. I purchased a Head-Quarters tunning kit for it for 25$, and now this carb is totaly awsome!
Even with a bigger motor this carb is calibrated a little rich!
On a twin cam you will have to notch a couple of fins on your barrels to get proper fitment too.
If you have a little Dremel tool you will be fine.
And I noticed some odd tuning issues with it. I purchased a Head-Quarters tunning kit for it for 25$, and now this carb is totaly awsome!
Even with a bigger motor this carb is calibrated a little rich!
On a twin cam you will have to notch a couple of fins on your barrels to get proper fitment too.
If you have a little Dremel tool you will be fine.
#10