Softail Springer
#1
#2
The following 3 users liked this post by wyndnface:
#3
I just bought one to add to the fold...
I got a great deal, and yet was still skeptical based on internet research about the springer front end.
From what I read, they had issues with wearing out the head bearings and the "nightmare" of the maintenance needed.
Well, I bought the Springer anyways and went through it with a fine tooth comb.
I bought service/parts/electrical diagnostic manuals, and since it had 9,940 miles, I promptly did the 10K service.
There is certainly more parts to check and eventually replace on the springer. I did not find it difficult to check/work on. I checked the neck bearing adjustment, and mine was fine, with no signs of improper wear.
My opinion...... Yes, it takes a little more time to maintain the Springer, but I suspect if the recommended maintenance is performed, it won't be significantly more problematic than any other HD.
I think the Springers look great and it's a hoot to ride.... I'm really enjoying my Springer!
I got a great deal, and yet was still skeptical based on internet research about the springer front end.
From what I read, they had issues with wearing out the head bearings and the "nightmare" of the maintenance needed.
Well, I bought the Springer anyways and went through it with a fine tooth comb.
I bought service/parts/electrical diagnostic manuals, and since it had 9,940 miles, I promptly did the 10K service.
There is certainly more parts to check and eventually replace on the springer. I did not find it difficult to check/work on. I checked the neck bearing adjustment, and mine was fine, with no signs of improper wear.
My opinion...... Yes, it takes a little more time to maintain the Springer, but I suspect if the recommended maintenance is performed, it won't be significantly more problematic than any other HD.
I think the Springers look great and it's a hoot to ride.... I'm really enjoying my Springer!
The following 2 users liked this post by hattitude:
FLYING_BURRITO_BROTHER (01-12-2018),
SPRINGER (01-10-2018)
#4
The following 2 users liked this post by SPRINGER:
CZHD1 (04-17-2022),
FLYING_BURRITO_BROTHER (01-12-2018)
#5
#6
The following 3 users liked this post by bronxbill:
#8