I just put some joker 4 inch bridge risers and low bend 2.5” riser bar. All the stock wires fit you could even get bu with a medium bend possible.

The stock risers are 4-4.5” if I remember correctly. I know some models can have 10-13 rise added to the bike depending on how much wiring is tucked away from factory. I have t had a chance to play around yet but I was wondering if I could get by with a +8 on the stock set up without needing wiring extension

i dont think you could 8 inches. 6 tops. The brake line is too short and the cables. Are only tucked in about an inch under the rubber gasket. I was just in there last week doing my bars. Plus the lines need to be even longer for those lucky dave riser bars.