Seat Bolt
04-17-2016 | 01:21 PM
Thread Starter
|
Intermediate
Joined: Jan 2016
Posts: 25
Likes: 1
From: Visalia CA.
Seat Bolt
Can someone tell me if your local Harley dealer carries these bolts for our seats. I called and the guy doesn't know what I'm talking about. Can I order them from someplace else? Thanks
Attached Thumbnails
04-17-2016 | 04:34 PM
Joined: May 2012
Posts: 11,396
Likes: 3,390
From: Port St Lucie Florida
They must have a bunch in the service department - my friend got her Slim back without the bolt put back on after the bike was serviced.
04-17-2016 | 06:02 PM
Joined: Oct 2012
Posts: 4,423
Likes: 45
From: Outside the Lines
It's a 1/4-20 threaded screw. A 3/4" or 1" length will do. You can find it at any hardware store.
04-17-2016 | 06:18 PM
Joined: Nov 2011
Posts: 1,371
Likes: 355
From: Australia
It might be :#52720-00A.
Post a pic of where it goes and i can tell you.
Last edited by S.D.M.F; 04-17-2016 at 07:53 PM .
04-17-2016 | 06:37 PM
Thread Starter
|
Intermediate
Joined: Jan 2016
Posts: 25
Likes: 1
From: Visalia CA.
You bolt it on the frame and if you want the solo seat you use the threaded hole to screw the seat on. I hope it makes sense.
Attached Thumbnails
04-17-2016 | 06:39 PM
Joined: Feb 2014
Posts: 491
Likes: 10
From: ATX
might try dennis kirk but it looks to me like any correct sized bolt will do unless i'm misinterpreting the pictures
04-17-2016 | 06:44 PM
Thread Starter
|
Intermediate
Joined: Jan 2016
Posts: 25
Likes: 1
From: Visalia CA.
It's threaded inside the hole so you can use the smaller screw on the solo seat.
Attached Thumbnails
04-17-2016 | 07:04 PM
Joined: Feb 2014
Posts: 491
Likes: 10
From: ATX
ah that makes more sense. you're basically looking for some kind of internally threaded banjo bolt
04-17-2016 | 07:08 PM
Joined: Feb 2014
Posts: 491
Likes: 10
From: ATX
The following users liked this post:
04-17-2016 | 07:41 PM
Joined: Nov 2011
Posts: 1,371
Likes: 355
From: Australia
This is it: Part # 52720-00A
part # 6409 is the nylon washer if you need it.
Last edited by S.D.M.F; 04-17-2016 at 07:50 PM .
The following users liked this post: