Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

Rocker B: MY ROCKER C MOD THREAD

Thread Tools
 
Search this Thread
 
  #61  
Old 03-15-2016 | 05:39 PM
LA_Dog's Avatar
LA_Dog
Outstanding HDF Member
Joined: Jun 2014
Posts: 3,185
Likes: 185
From: 90210
Default

^^ +1 on that- anything you can do to show off the tire, wheel, pulley from all angles IMO looks a lot better. Just a thought what about having the fender end right at the top of the swingarm? so that way the side view of tire, wheel etc is totally open within the "V" portion of the swingarm.
 
  #62  
Old 03-15-2016 | 05:45 PM
Rocker B's Avatar
Rocker B
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
Default

Originally Posted by LA_Dog
^^ +1 on that- anything you can do to show off the tire, wheel, pulley from all angles IMO looks a lot better. Just a thought what about having the fender end right at the top of the swingarm? so that way the side view of tire, wheel etc is totally open within the "V" portion of the swingarm.
I'll have to think about that one....pretty sure I want to chop the back of the fender.....trying to picture it with both ends chopped...or would you just do the front?? and the more I think about it, that would be more like the BO...I want to keep the basic Rocker look as much as possible, with these mods..
 

Last edited by Rocker B; 03-15-2016 at 05:51 PM.
  #63  
Old 03-16-2016 | 09:08 AM
skid_pimp's Avatar
skid_pimp
Road Warrior
Joined: Jul 2012
Posts: 1,996
Likes: 416
From: Cranbourne, VIC Australia
Default

I know lots of folks like to cut the fender down, but once I relocated the stupid plate, I saw good looking real estate for artwork...
 
  #64  
Old 03-16-2016 | 10:15 AM
LA_Dog's Avatar
LA_Dog
Outstanding HDF Member
Joined: Jun 2014
Posts: 3,185
Likes: 185
From: 90210
Default

Originally Posted by Rocker B
I'll have to think about that one....pretty sure I want to chop the back of the fender.....trying to picture it with both ends chopped...or would you just do the front?? and the more I think about it, that would be more like the BO...I want to keep the basic Rocker look as much as possible, with these mods..
yeh I see what you are saying with keeping some distinct styling cues - and Skid Pimp did raise a good point about more real-estate for paint artwork. I'd chop the back a bit for sure though if you want to have more of the radical custom look vs stock.
 
  #65  
Old 03-16-2016 | 11:48 PM
Rocker B's Avatar
Rocker B
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
Default

Originally Posted by skid_pimp
I know lots of folks like to cut the fender down, but once I relocated the stupid plate, I saw good looking real estate for artwork...
Looks great!!.... I'm curious about your front 21"x 3.5"..any trouble with the fit? is the hub width the same as the stock 19"x 2.15"?? I would like to run a wider front tire when I change to the 21"..
 

Last edited by Rocker B; 03-16-2016 at 11:53 PM.
  #66  
Old 03-17-2016 | 01:00 AM
LA_Dog's Avatar
LA_Dog
Outstanding HDF Member
Joined: Jun 2014
Posts: 3,185
Likes: 185
From: 90210
Default

^^ yeh that Rocker of yours is begging for a 21" wheel. Usually if you go with a reputable brand like PM they will send the wheel with the appropriate matching spacers. others may too I just only have experience with PM.
 
  #67  
Old 03-17-2016 | 01:07 AM
Rocker B's Avatar
Rocker B
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
Default

Originally Posted by LA_Dog
^^ yeh that Rocker of yours is begging for a 21" wheel. Usually if you go with a reputable brand like PM they will send the wheel with the appropriate matching spacers. others may too I just only have experience with PM.
I was thinking if the hubs a different size, I could use different spacers, but the rotor would not be in the same place, it would be out further, then what about the caliper, it wouldn't line up.. can't really move that??
 

Last edited by Rocker B; 03-17-2016 at 01:12 AM.
  #68  
Old 03-17-2016 | 02:46 AM
Rocker B's Avatar
Rocker B
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
Default

Looks like I'll be going with a 70t pulley after all...I was hanging out at my local indy today, I like to go by every couple weeks and shoot the **** or bend his ear about mod plans..He had three bikes there now (one of them his) that have open belt drives primarys... after talking to him about it, I thought that would be a cool mod for the Rocker. I figure if I'm doing that, I might as well go to a 30t front pulley!! Get the full 13% increase and not have any clearance issues with the 72t.. Thinking I would do the work, I asked him about the install, how hard it would be, he said that if he did it, he would charge me 2 hours labor for the belt drive, and since he's in there, he would only charge me 30 minutes more labor to install the 30t!! He only charges $75 an hour, I like to wrench...but for under $200 bucks labor, I'll let him do the job!! Time to pick out a open belt drive kit!!
 

Last edited by Rocker B; 03-17-2016 at 02:54 AM.
  #69  
Old 03-17-2016 | 07:04 AM
skid_pimp's Avatar
skid_pimp
Road Warrior
Joined: Jul 2012
Posts: 1,996
Likes: 416
From: Cranbourne, VIC Australia
Default

Originally Posted by Rocker B
Looks great!!.... I'm curious about your front 21"x 3.5"..any trouble with the fit? is the hub width the same as the stock 19"x 2.15"?? I would like to run a wider front tire when I change to the 21"..
The hubs on both of my wheels are identical size as stock, I run chromed stock spacers. 21 looks perfect on a Rocker in my opinion, it just fits the factory rake like a glove.
 
  #70  
Old 03-17-2016 | 10:53 AM
Sarah93003's Avatar
Sarah93003
Club Member
Joined: Sep 2014
Posts: 25,168
Likes: 30,073
Default

Originally Posted by Rocker B
Looks like I'll be going with a 70t pulley after all...I was hanging out at my local indy today, I like to go by every couple weeks and shoot the **** or bend his ear about mod plans..He had three bikes there now (one of them his) that have open belt drives primarys... after talking to him about it, I thought that would be a cool mod for the Rocker. I figure if I'm doing that, I might as well go to a 30t front pulley!! Get the full 13% increase and not have any clearance issues with the 72t.. Thinking I would do the work, I asked him about the install, how hard it would be, he said that if he did it, he would charge me 2 hours labor for the belt drive, and since he's in there, he would only charge me 30 minutes more labor to install the 30t!! He only charges $75 an hour, I like to wrench...but for under $200 bucks labor, I'll let him do the job!! Time to pick out a open belt drive kit!!
Sweet!!! I've been dying to see an open primary on the Rocker. I've often thought that would look wicked. It would look even cooler with a blower on the motor.

EDIT: I looked at the ProCharger blower and it's way uglier than I remember. 59-70 more HP would be awesome, but not at the cost of looks.
 

Last edited by Sarah93003; 03-17-2016 at 12:10 PM.


Quick Reply: Rocker B: MY ROCKER C MOD THREAD



All times are GMT -5. The time now is 10:15 AM.