Rocker B: MY ROCKER C MOD THREAD
#581
12-12-2016 | 01:19 AM
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
No problem Sarah!! Let me know if your ever up this way...
No rain here tomorrow,
I plan on taking a nice long ride. 
... I'll post a before, and after cam swap, video when I get home....
No rain here tomorrow,
I plan on taking a nice long ride. ... I'll post a before, and after cam swap, video when I get home....
The following users liked this post:
Sarah93003 (12-12-2016)
#582
12-13-2016 | 12:17 AM
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
WOW!!! I'm diggin' these cams,
feels like a different bike!! Pretty much from idle, twist the throttle and its on the cam, and was still pulling strong at 5450rpm (todays saved "high rpm" on the Dakota Digital). I like the Andrews 37h cams in my Breakout, and both cams have a very nice, similar sounding "lope" at idle.....But MAN, if LOW/MID range torque is what your after, these S&S 583Cs are the ticket!!! 
feels like a different bike!! Pretty much from idle, twist the throttle and its on the cam, and was still pulling strong at 5450rpm (todays saved "high rpm" on the Dakota Digital). I like the Andrews 37h cams in my Breakout, and both cams have a very nice, similar sounding "lope" at idle.....But MAN, if LOW/MID range torque is what your after, these S&S 583Cs are the ticket!!! Last edited by Rocker B; 12-13-2016 at 01:27 AM.
#585
12-13-2016 | 06:14 PM
Ultimate HDF Member
Joined: Jul 2014
Posts: 5,652
Likes: 430
From: MASS_hole
#586
12-15-2016 | 07:13 AM
6th Gear
Joined: Jan 2010
Posts: 12
Likes: 1
From: N. E. Pa.
The following users liked this post:
Sarah93003 (12-15-2016)
#587
12-15-2016 | 07:25 AM
6th Gear
Joined: Jan 2010
Posts: 12
Likes: 1
From: N. E. Pa.
center console/speedo
Rocker B your MOD looks amazing . Not going that extreme with my 08 C though. The HD oem part # I got for the center tank console is 71250-00A for an 09 FLSTN. Is that correct? If not, what is the part # you used. Also need part # for multi guage (red) speedo and what bike that's for. Thanks
#588
12-15-2016 | 09:34 AM
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
Thank you!!!
Thanks splatttttt!!!
Glad ya like it sdows!!! The tank console was used on the Duece/FXSTD, it's part #71439-00. Here's a link to all the parts needed to do the swap...http://partsfinder.onlinemicrofiche....=49&c=0&d=2007 FXSTD SOFTAILŽ DEUCE (JB) INSTRUMENT ASSEMBLY.
You'll need most of the parts listed, and multiples of a few. You can PM me for details if needed......The speedo/multi guage is a Dakota Digital MCL 2004R.
It fits in several different HD consoles and is direct plug in, here's ya go.....http://www.dakotadigital.com/index.c...cat/cat521.htm
Rocker B your MOD looks amazing . Not going that extreme with my 08 C though. The HD oem part # I got for the center tank console is 71250-00A for an 09 FLSTN. Is that correct? If not, what is the part # you used. Also need part # for multi guage (red) speedo and what bike that's for. Thanks
You'll need most of the parts listed, and multiples of a few. You can PM me for details if needed......The speedo/multi guage is a Dakota Digital MCL 2004R.
It fits in several different HD consoles and is direct plug in, here's ya go.....http://www.dakotadigital.com/index.c...cat/cat521.htm
Last edited by Rocker B; 12-15-2016 at 10:31 AM.
#590
02-17-2017 | 03:32 AM
6th Gear
Joined: Jan 2017
Posts: 14
Likes: 0
From: melbourne australia
regarding rocker c
let me say your bike is or some
i own one to mildly modified
however i really need your help
i have just purchased a 2003 deuce console along with
a analogue speedo and tach and 2003 indicator beze led thingo
(genuine Harley stuff speedo plug and play no problem there
but the indicator oil light neutral bezel that sits below speedo
i cant figure out how to wire it in to suit the rocker wiring
any help i would appreciate it immensely
i own one to mildly modified
however i really need your help
i have just purchased a 2003 deuce console along with
a analogue speedo and tach and 2003 indicator beze led thingo
(genuine Harley stuff speedo plug and play no problem there
but the indicator oil light neutral bezel that sits below speedo
i cant figure out how to wire it in to suit the rocker wiring
any help i would appreciate it immensely