Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

Rocker B: MY ROCKER C MOD THREAD

Thread Tools
 
Search this Thread
 
  #391  
Old 07-12-2016 | 09:26 PM
Sarah93003's Avatar
Sarah93003
Club Member
Joined: Sep 2014
Posts: 25,168
Likes: 30,073
Default

I am really liking the fender. Thats a lot of work and I think it will be worth it. I'm anxious to see it painted.
 
  #392  
Old 07-12-2016 | 11:53 PM
EagleRay's Avatar
EagleRay
Ultimate HDF Member
Joined: Nov 2013
Posts: 7,493
Likes: 101
From: Stuttgart, Germany
Default

With the raw fender test-mounted to the bike I start asking myself how that fender would look chromed
 
  #393  
Old 07-13-2016 | 01:06 AM
j33ptj's Avatar
j33ptj
Road Warrior
Joined: Jul 2008
Posts: 1,447
Likes: 115
From: The Netherlands
Default

Looking great!! You could have cut a bit out of the front of the fender for the fuse box...

Robert
 
  #394  
Old 07-13-2016 | 02:09 AM
Rocker B's Avatar
Rocker B
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
Default

Originally Posted by Sarah93003
I am really liking the fender. Thats a lot of work and I think it will be worth it. I'm anxious to see it painted.
Thanks Sarah, The actual grinding went pretty fast. The prep took a while, but I wasn't sure how much control I would have with the grinder and didn't want to mess up any paint, so I went a little over board with the protection...
Originally Posted by EagleRay
With the raw fender test-mounted to the bike I start asking myself how that fender would look chromed
That's funny Ray....I'd be lying if I said that thought didn't briefly cross my mind!!
Originally Posted by j33ptj
Looking great!! You could have cut a bit out of the front of the fender for the fuse box...
Robert
Thanks man!! and ya, I could have cut or ground the fender, but it was easier and faster to just re-drill the 2 holes in the mounting plate and push it forward, but it does JUST fit, if the fuse box was any bigger, I probably would have HAD to cut fender....
 

Last edited by Rocker B; 07-13-2016 at 02:12 AM.
  #395  
Old 07-13-2016 | 04:26 AM
Nostradamus74's Avatar
Nostradamus74
Road Captain
Joined: Dec 2013
Posts: 631
Likes: 25
From: Rome (Italy)
Default

Well, mirror polished tins are actually what I was planning from the very beginning of my mods too and, sooner or later, will do what I have in mind...
Mirror polished tin surface like BO CVO models, vivid black old school flames with a thin orange profile...that's what I'd consider a true masterpiece but it's a complicated procedure and would take time, money and skills...
For the moment my focus is on the 15 lt. Thunderbike stretched and console-less alu tank and matching seat I should shortly receive...
 
  #396  
Old 07-13-2016 | 02:09 PM
Rocker B's Avatar
Rocker B
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
Default

Originally Posted by Nostradamus74
For the moment my focus is on the 15 lt. Thunderbike stretched and console-less alu tank and matching seat I should shortly receive...
Cool, I knew you ordered the tank, was wondering if you got it yet....can't wait to see it installed!!... I like the look of the long tank/stubby seat combo on my Rocker, should look similar on the BO...

.......I got the seat mounted!! I had to elongate the slots in the mounting brackets where it bolts to the fender/frame, and replace the bolts where the bracket mounts to the seat, with lower profile, carriage bolts. The carriage bolts let the seat sit down tight on the fender and frame. It fits great, like the seat was made for this fender, very happy with the way it worked out!! I still have to decide if I want to have them painted with the fender, or leave them black...







 

Last edited by Rocker B; 07-13-2016 at 03:18 PM.
  #397  
Old 07-13-2016 | 05:07 PM
Sarah93003's Avatar
Sarah93003
Club Member
Joined: Sep 2014
Posts: 25,168
Likes: 30,073
Default

I've got to toss my 2 cents out. I keep staring at that new rear fender and I like an awful lot about it. Except, that little wing hanging down just right of the mounting bolts. Is that for structural integrity? If not, I'd consider smoothing out that line into the rest of the fender.

Okay, carry on!!
 
  #398  
Old 07-13-2016 | 05:42 PM
Rocker B's Avatar
Rocker B
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
Default

Originally Posted by Sarah93003
I've got to toss my 2 cents out. I keep staring at that new rear fender and I like an awful lot about it. Except, that little wing hanging down just right of the mounting bolts. Is that for structural integrity? If not, I'd consider smoothing out that line into the rest of the fender.

Okay, carry on!!
Totally respect your opinion Sarah.....but, I covered up the "wing" in my pic and it looks ok, but I definitely like it better with "wing" lol... matches the curved line of the wheel......plus the wings should make the bike really fly!!
 

Last edited by Rocker B; 07-13-2016 at 05:48 PM.
  #399  
Old 07-15-2016 | 10:18 AM
Rocker B's Avatar
Rocker B
Thread Starter
|
Road Warrior
Joined: Jul 2014
Posts: 1,624
Likes: 308
From: "Old Hangtown" Placerville Ca.
Default

My front fender is shipping today!!! It got a little iffy as to whether I would be getting it.....I called Mon. to check on it and talked to Rich the owner of Bitchin Seats. It's a good thing I called. He told me he was about to make my fender and was going over the order with me. It was then that he informed me that the 21" fender that he makes is designed for his wheel, or other wheels that need to be centered between the forks and it wouldn't work for me (I have the stock off-set setup)....anyway, after explaining that I really didn't want to change the hub, spacers, and grind down caliper mounts, he said he MAY be able to make me a fender to work with what I have, but he needed to check it out because the tolerances would be tight. On Thur. he told me it SHOULD be fine and was going to "set up different tooling to make this special fender for you".....Well, at 12:29 A.M. today, (he told me he got there at 4:30 A.M) I got these texts (out of order) and pics!!.... looks like I'm getting a one-off custom!! Huge thanks to Rich at Bitchin Seats for going way out of his way on this one!!!! The fender had to be made to mold around the right fork tube, with a small indent for the upper mount. I think he did an awesome job!!









 

Last edited by Rocker B; 07-15-2016 at 10:29 AM.
  #400  
Old 07-15-2016 | 10:25 AM
Sarah93003's Avatar
Sarah93003
Club Member
Joined: Sep 2014
Posts: 25,168
Likes: 30,073
Default

Sweet!!
 


Quick Reply: Rocker B: MY ROCKER C MOD THREAD



All times are GMT -5. The time now is 08:26 AM.