I can't help with the bars, but I will give 2 thumbs way up for the Springer front end on a Slim. Looking at your Bike, HD should have built one for us! Awesome! Hope you get the bars fitted just like in your photo.

I would love to see that front end on my Slim with my '29 style seat and flush seat pan.

 

Just pulled the trigger on paugcho speedster bars that replace the top clamp. Very excited. Will post pics once completed

 

I really like the look. I have a few questions if you dont mind.

Did you just reverse the front wheel (since the rotor is on the right side now)?
What are you going to use for a caliper?

Thanks!

T.

 

I did have to reverse the front wheel. Custom cut the 3/4" axel spacer/sleeve, and machine out some of the hub to get the wider 3/4" bearings to seat like the stock ones. Going with a motto iron springer brake.

 

I wish I had some better shots of my bike just now, but I don't. I put a springer on my night train. I went with wild1's T bars and ran those for a few years, but I'm looking for something else.
I have to reach just a little too far. Not a huge fan of apes, but I thought some 10 inch jobs wouldn't be too obnoxious and maybe reduce my reach a bit.

Good luck

 

Love that look! Since the day I bought my Slim I've wanted to do a springer conversion.
I'm getting closer. Found a guy on YouTube who did one. How did you make out with the ABS sensor on the axle? Any tips would be appreciated!!

 

Doubt you get a response since Kiowa Pilot has not had any activity since 02-07-2017...

good luck,

T.