Cam Mods for 95 Cubes.
#1
#5
#6
Join Date: Feb 2005
Location: Twin Cities Minnesota
Posts: 4,085
Received 7,792 Likes
on
1,271 Posts
RE: Cam Mods for 95 Cubes.
I like the Kuryakyn packages....other combo's did not work as well. Go to there web sight and look at the Crusher Kits. Just keep in mind what your final outcome is that you are after....so you dont have to buy parts twice that may not be compatable with each other.
#7
RE: Cam Mods for 95 Cubes.
04 Fat Boy with 95 kit, Mikuni carb and SE AC kit...installed the the 251 mid cam too...it has about the same lift as the high-end 257 cam but with less duration...nice mid-rpm perfomance...the mids are were most bikes spend most of their time...that sold it for me....and having a little extra performance 2-up.
Trending Topics
#9
RE: Cam Mods for 95 Cubes.
I just installed the 585 g kit, i have a 95 inch with ported cylinders heads with 10.5:1 pop ups, roller rockers, vance and hines big radius with a power commander with a 50 shot of nitrous. We are going to put it back on the dyno this weekend and retune it, it made 94hp without the portwork and with a set of 204 cams and 9.5:1 compression. I am looking for around 110-115 on motor and 140 or so on the bottle, I will post the results, i just finished the build today here is a pic of it in progress, looks sick
[IMG]local://upfiles/30129/D856E127C8E749B79354CFA963EE1E33.jpg[/IMG]
[IMG]local://upfiles/30129/D856E127C8E749B79354CFA963EE1E33.jpg[/IMG]
#10
RE: Cam Mods for 95 Cubes.
Just finished my 95" build. Running Andrews 32g cams, HTCC heads, high comp pistons, 10.5:1, DTT ignition, SE clutch spring with VPC, 3.37 gearing, Mikuni 45mm carb. Haven't had much time to ride due to weather, but initial impression is WOW! Can't wait to get break in done so I can get on it.