Originally Posted by Dynaunder

Hi there , I have been playing with Harley wheels for the last five years , as a option if you run out of space a solution would be to mount the ABS bearing on the other side as you have notes it is a little thicker then a normal bearing and routing the ABS pick up wire to the other side it is a breeze . The Abs will work as normal and will not display a fault code , I done that and the wheel was death centre in relation to the fork tubes . The rear it is a breeze.

Bike looks good like you a picked up a S model on Saturday , right now not game to change anything , sorry It is a lie got the S/E cannon with caps he he he love . post picture soon like you I have switchback wheels sitting right there saying swap me swap me

Ride safe Dynaunder

Originally Posted by wachuko

And also turned the tag around... much better now in terms of how it sticks out...

Originally Posted by Gozo

Can you please explain again, the type and model no of the "Bracket" you are using for the side mounted license plate. I can't seem to find a bracket made specifically for the Slim.

Originally Posted by Gozo

Yes it might be the stock, but how is it mounted on the left of the fender On the signal bracket?

Originally Posted by WKNDS

Look at post #1
https://www.hdforums.com/forum/softa...l#post14455140

or here's a better shot


hth,

T.

Originally Posted by wachuko

Went to pick up the ABS sensor... had ordered two different ones. Turns out, one of the two is a perfect fit, but the connector is different.