S-Series - Home Base
#791
#792
#793
...snip...
I'm having issues mounting the WLA style seat & have posted the issues in a new thread, but was wondering those that have fitted the piston kit, is it ok to re-locate the earths to the bolt at the back of the piston ? (The one with the Phillips style bolt).
...snip...
I'm having issues mounting the WLA style seat & have posted the issues in a new thread, but was wondering those that have fitted the piston kit, is it ok to re-locate the earths to the bolt at the back of the piston ? (The one with the Phillips style bolt).
...snip...
I'm not sure you'd get a good ground there. Definately remove paint to get a good
connection. All you can do it try. I used the two bolts going into the frame.
One of them is a long "all thread" for lack of a better explaination, that I used
to secure the top of the cover. Here's some pics.
hope this helps,
T.
#794
WKNDS thanks for the pics, I did think of using the 2 front bolts as you did, however using the rear seems to work ok at the moment.
I'm going to try & use the original plastic seat pan but if it doesn't work out I may just go for the same as you with the lower cover & the fls ecm cover.
Already stripped the seat to see what the pan looks like & will dry fit it to see how it looks before cutting it up.
I'm going to try & use the original plastic seat pan but if it doesn't work out I may just go for the same as you with the lower cover & the fls ecm cover.
Already stripped the seat to see what the pan looks like & will dry fit it to see how it looks before cutting it up.
#795
#796
Originally Posted by paullavery
WKNDS thanks for the pics, I did think of using the 2 front bolts as you did, however using the rear seems to work ok at the moment.
I'm going to try & use the original plastic seat pan but if it doesn't work out I may just go for the same as you with the lower cover & the fls ecm cover.
Already stripped the seat to see what the pan looks like & will dry fit it to see how it looks before cutting it up.
I'm going to try & use the original plastic seat pan but if it doesn't work out I may just go for the same as you with the lower cover & the fls ecm cover.
Already stripped the seat to see what the pan looks like & will dry fit it to see how it looks before cutting it up.
#797
I'm not sure you'd get a good ground there. Definately remove paint to get a good
connection. All you can do it try. I used the two bolts going into the frame.
One of them is a long "all thread" for lack of a better explaination, that I used
to secure the top of the cover. Here's some pics.
hope this helps,
T.
connection. All you can do it try. I used the two bolts going into the frame.
One of them is a long "all thread" for lack of a better explaination, that I used
to secure the top of the cover. Here's some pics.
hope this helps,
T.
#798
#800
Relocate your ECM
I can't wait until I see a pogo seat set up with a cover like I made: