S-Series - Home Base
#381
#383
Well after lots of searching around on the internet i'm going with this set up on my S for bags, it will enable me to retain the 2 up mustang seat, won't be affected by the stock exhausts & the adapted brackets place the bags further forward so no need to re-locate the turn signals ;
....snip.........
!
....snip.........
!
Have you checked with Hansen Styling in Germany? They also offer
bags that do not require taillight relocation. You may be able to
get them, but Hansen doesn't export to the US so we can't...
Good luck,
T.
#384
during the day. Got them really just to make her more visible to the
Cage drivers...
Some pics with garage lights off, then on...
Hope this helps,
T.
#386
#387
Center Tail / Stop light photo?
Rocket, How about a photo or 2 of your bike with the new Black Beauty tail light mounted???
Thanks, Steve.
[QUOTE=Rocket Rider;14512663]Thanks to tech advice from SLV and Jetfever, I successfully installed a fender-mounted Jammer "Black Beauty" tail/stop/license plate light on the FLSS today. I thought I'd share a few photos, in case someone else could use the info.
Thanks, Steve.
[QUOTE=Rocket Rider;14512663]Thanks to tech advice from SLV and Jetfever, I successfully installed a fender-mounted Jammer "Black Beauty" tail/stop/license plate light on the FLSS today. I thought I'd share a few photos, in case someone else could use the info.
#388
Went for an awesome ride this morning, but am still in the process of breaking her in. When I got back, I added the HD engine guard and some flush mount Cirius LED lights. The lights were a PITA to install as I broke 2 taps while trying to thread the mounting holes. I couldn't remove one of the taps so I ended up drilling another set of holes and angled the lights out a little. Hopefully I'll be able to complete the wiring tomorrow
I like those lights - https://www.ciriususa.com/product/engine-guard-lights/
#389
Thanks Wachuko! Like WKNDS, I added these lights to be more visible during the night. I don't have any pics yet with the lights on (still figuring out which wires to tap), but WKNDS' post helped me make up my mind when deciding whether or not to purchase them.
Bike is looking great!!!
I like those lights - https://www.ciriususa.com/product/engine-guard-lights/
I like those lights - https://www.ciriususa.com/product/engine-guard-lights/
#390