^^^ Those are stock Heritage Springer pipes. Easy to obtain.

 

True, Joe, but those are set up for duals, right? You think it's less to cut the crossover than get 2 to 1?

 

The left pipe comes right off and you could easily cap the stub pipe or cut off the stub pipe and weld a plate over the hole. That'd be super easy.

 

I'm sold! Where can I find such a treasure?

 

Still available and pretty cheap from Harley. Search for a 2007 FLSTSC.

Ronnies has a great HD parts finder.

You can usually find the system on eBay as well as lots of Springer guys put on true duals. I bet if you posted up a thread seeking factory springer exhaust you'd have several folks willing to give you a deal.

http://partsfinder.onlinemicrofiche....HAUST%20SYSTEM

 

Joe! You come through again. And...

Splatttttttttt...tttt, I owe you major kudos. You were going this way WEEKS back. I'm slow on the uptake, but I'm with you now. I'll try this angle for out little project.

 

So here's irony for ya. Take a look at the stock exhaust setup for my bike.





80% of the way to what I want...figures.

 

Another option.

http://www.ebay.com/itm/SUPERTRAPP-2...-/191218326856

 

crap, I had the stock set up for this bike a few months back..I used to own a 05 but the exhaust was the first thing I took off and I think I sold that set up for 150.00..

 

No sweat, man. Just my luck.