Show me your "Fangs"...
#51
(I looked at the instructions for a few seconds, then threw 'em away)
T.
#52
No it is for QD, I have the quick detach with the aux lights.
Install instructions are on the Harley store website under the "more info" tab for all accessories.
http://www.harley-davidson.com/store...wind-deflector
Install instructions are on the Harley store website under the "more info" tab for all accessories.
http://www.harley-davidson.com/store...wind-deflector
Last edited by Jake flstfb; 01-20-2016 at 05:49 PM.
#53
No it is for QD, I have the quick detach with the aux lights.
Install instructions are on the Harley store website under the "more info" tab for all accessories.
http://www.harley-davidson.com/store...wind-deflector
Install instructions are on the Harley store website under the "more info" tab for all accessories.
http://www.harley-davidson.com/store...wind-deflector
Ok, I think we're saying the same thing, but I thought you mean "literally"
mount them outside of the where the grommet is located - which would not work.
Even the HD picture on the website above shows them mounted the same as mine....
T.
#54
Jake flstfb, I missed the note about 2000 and newer. But in your picture yours look different than WKNDS and mine, maybe the glare off so much chrome. Funny, but it's almost easier to change a flat tire than install some of these parts and I built my first chop in 1973. Guess everything is more difficult when you get old.
#56
Jake flstfb, I missed the note about 2000 and newer. But in your picture yours look different than WKNDS and mine, maybe the glare off so much chrome. Funny, but it's almost easier to change a flat tire than install some of these parts and I built my first chop in 1973. Guess everything is more difficult when you get old.
#57
#58
It is nice to see how everyone has mounted them. The instructions are only good for making paper airplanes.
I have not mounted mine yet, they have to go for powder first. Chrome would not look good on my Lo.
My QD windshield has different mounting bolts than every picture I have seen so far, the spring lock for my QD latches onto a post that is on the outside end of the mounting bolts. There is no room with the windshield bracket to make grommets wider and windshield won't lock into place if the fangs are mounted on the outside. May have to make some smaller spacers between the grommets and light bar mount.
Looks like I will have to figure out how to fit them before they get powdered. Wouldn't want to scratch them trying to figure out how to mount them.
I have not mounted mine yet, they have to go for powder first. Chrome would not look good on my Lo.
My QD windshield has different mounting bolts than every picture I have seen so far, the spring lock for my QD latches onto a post that is on the outside end of the mounting bolts. There is no room with the windshield bracket to make grommets wider and windshield won't lock into place if the fangs are mounted on the outside. May have to make some smaller spacers between the grommets and light bar mount.
Looks like I will have to figure out how to fit them before they get powdered. Wouldn't want to scratch them trying to figure out how to mount them.
Last edited by Gommee; 01-20-2016 at 11:38 PM.