26" Time!
#111
#112
gentlemen....you're not seeing the big picture here.....that photo I posted was only an example of what could be used for your application . the shape is what you need....the offset.... if needed..... can be machined to whatever thickness applies to YOUR application . so don't look at that part being a direct bolt on part for you .
#114
#115
#117
Alright boys I saw this on that web site. These appear to have the "L" shape that we would need for our mounting points.
But if you look closely all the holes seem to be blind holes (I think that's what they are called when there is only one opening). So I'm not sure how we would attach these to the fork legs.
Here is the link to the site.
https://www.customcycleengineering.c...nderSpacers-36
But if you look closely all the holes seem to be blind holes (I think that's what they are called when there is only one opening). So I'm not sure how we would attach these to the fork legs.
Here is the link to the site.
https://www.customcycleengineering.c...nderSpacers-36
Thread
Thread Starter
Forum
Replies
Last Post