Alert - Front brake master cylinder leakage on Breakout and ?
#1
Alert - Front brake master cylinder leakage on Breakout and ?
I thought I'd pass on an alert for Breakout owners, and possibly owners of other HD models.
Late last week, after a ride on my 2014 Breakout, with just 4300 miles on it, I noticed some liquid "tracks" on the top of the front brake master cylinder. I traced them back to the front gasket surface of the master cylinder - the wind created by highway speeds had simply blown leaking brake fluid rearward. I quickly wiped it off, but the fluid had already permanently marked the lid of the master cylinder. I checked both mounting bolts: they were NOT loose.
So, I made an appointment with my selling HD dealer, and took the bike in today. During the 30 mile ride in to the dealership, more fluid appeared and tracked on the lid.
The dealership replaced the master cylinder cap and gasket under warranty. But, here's the interesting part: The dealership made the swap before I even had to ask for a new lid (not just a new gasket), AND THEY HAD IT IN STOCK. Given the prompt, no fuss replacement and the fact that the gasket and lid were both in stock, I suspect I am not the only owner with a leaking master cylinder gasket.
If yours has been leaking and you did not notice, you will see "tracks" in the paint finish on the lid, where the brake fluid has attacked the paint and permanently scarred it.
Jim G
Late last week, after a ride on my 2014 Breakout, with just 4300 miles on it, I noticed some liquid "tracks" on the top of the front brake master cylinder. I traced them back to the front gasket surface of the master cylinder - the wind created by highway speeds had simply blown leaking brake fluid rearward. I quickly wiped it off, but the fluid had already permanently marked the lid of the master cylinder. I checked both mounting bolts: they were NOT loose.
So, I made an appointment with my selling HD dealer, and took the bike in today. During the 30 mile ride in to the dealership, more fluid appeared and tracked on the lid.
The dealership replaced the master cylinder cap and gasket under warranty. But, here's the interesting part: The dealership made the swap before I even had to ask for a new lid (not just a new gasket), AND THEY HAD IT IN STOCK. Given the prompt, no fuss replacement and the fact that the gasket and lid were both in stock, I suspect I am not the only owner with a leaking master cylinder gasket.
If yours has been leaking and you did not notice, you will see "tracks" in the paint finish on the lid, where the brake fluid has attacked the paint and permanently scarred it.
Jim G
#4
Mine was leaking, too, at 900 miles. Didn't require any new parts to fix and I did it myself.
Held bike upright. Removed cap and seal. Wiped seal completely dry, reinstalled seal, reinstalled cap, and alternately tightened screws without over tightening. Not a drop in the last several thousand miles.
Most of the time the leaks on master cylinder seals are due to improper installation; the seal was installed wet with fluid on the edges. Once these seals are wet with fluid on the sealing surface itself they will leak.
Held bike upright. Removed cap and seal. Wiped seal completely dry, reinstalled seal, reinstalled cap, and alternately tightened screws without over tightening. Not a drop in the last several thousand miles.
Most of the time the leaks on master cylinder seals are due to improper installation; the seal was installed wet with fluid on the edges. Once these seals are wet with fluid on the sealing surface itself they will leak.
#5
Mine was leaking, too, at 900 miles. Didn't require any new parts to fix and I did it myself.
Held bike upright. Removed cap and seal. Wiped seal completely dry, reinstalled seal, reinstalled cap, and alternately tightened screws without over tightening. Not a drop in the last several thousand miles.
Most of the time the leaks on master cylinder seals are due to improper installation; the seal was installed wet with fluid on the edges. Once these seals are wet with fluid on the sealing surface itself they will leak.
Held bike upright. Removed cap and seal. Wiped seal completely dry, reinstalled seal, reinstalled cap, and alternately tightened screws without over tightening. Not a drop in the last several thousand miles.
Most of the time the leaks on master cylinder seals are due to improper installation; the seal was installed wet with fluid on the edges. Once these seals are wet with fluid on the sealing surface itself they will leak.
Jim G
#6
Yes, in fact mine occurred just after my initial service and it was most likely due to the tech being in a hurry.
#7
Trending Topics
#8
Join Date: Sep 2013
Location: Great State of Canada
Posts: 6,171
Received 1,940 Likes
on
1,116 Posts
#10