Engine Mechanical Topics Discussion for motor builds, cams, head work, stripped bolts and other engine related issues. The good and the bad. If it goes round and around or up and down, post it here.

milwalkee8 in a TC frame

Thread Tools
 
Search this Thread
 
  #1  
Old 07-11-2024, 02:39 PM
harleyrider06010's Avatar
harleyrider06010
harleyrider06010 is offline
Intermediate
Thread Starter
Join Date: Dec 2014
Location: CT
Posts: 40
Received 4 Likes on 3 Posts
Default milwalkee8 in a TC frame

Hi and thank in advance for your help. I have a 2011 twin cam ultra thats gotten a few miles on her. I have an opportunity to buy a power train out of a 114 street glide. My question is will it fit? I know ill need to update the electronics too but will the engine and trans bolt in?
 
  #2  
Old 07-11-2024, 07:48 PM
TexasScooterTrash's Avatar
TexasScooterTrash
TexasScooterTrash is offline
Stellar HDF Member
Join Date: Feb 2013
Location: Dallas, Texas
Posts: 2,594
Received 1,330 Likes on 815 Posts
Default

ANY engine/trans combo WILL FIT. Ya might have to make a few small adjustments for a perfect fit. Tools required - cutoff wheel, welder, hi strength steel tubing, frame jig and very good measurements. HAVE FUN!!!!!!!!
 
  #3  
Old 07-11-2024, 08:19 PM
TriGeezer's Avatar
TriGeezer
TriGeezer is offline
Seasoned HDF Member
Join Date: May 2012
Location: Carlsbad, CA
Posts: 32,198
Received 30,226 Likes on 11,407 Posts
Default

Like a real estate agent once said…”Any closet is a walk in closet if you try hard enough”.

 
  #4  
Old 07-11-2024, 08:21 PM
CoolBreeze3646's Avatar
CoolBreeze3646
CoolBreeze3646 is offline
Seasoned HDF Member
Join Date: Aug 2006
Location: South Central, PA Near the MD Border
Posts: 21,914
Received 21,092 Likes on 7,379 Posts
Default

Originally Posted by harleyrider06010
Hi and thank in advance for your help. I have a 2011 twin cam ultra thats gotten a few miles on her. I have an opportunity to buy a power train out of a 114 street glide. My question is will it fit? I know ill need to update the electronics too but will the engine and trans bolt in?
No, it will not fit without major modifications.
 
  #5  
Old 07-12-2024, 06:28 AM
roussfam's Avatar
roussfam
roussfam is offline
Seasoned HDF Member
Join Date: Jan 2009
Location: Ottawa, Ontario
Posts: 11,482
Received 7,038 Likes on 3,667 Posts
Default

If they can put a V8 in a bike frame.....

Send pics when you're done
 
  #6  
Old 07-12-2024, 06:32 AM
Notgrownup's Avatar
Notgrownup
Notgrownup is offline
Seasoned HDF Member
Join Date: Mar 2009
Location: Snow Hill, NC
Posts: 23,236
Received 6,936 Likes on 3,551 Posts
Default

I put a 114” from a street glide in a 07 Electra Glide with no mods.
 
The following users liked this post:
Goose_NC (07-12-2024)
  #7  
Old 07-12-2024, 06:56 AM
roussfam's Avatar
roussfam
roussfam is offline
Seasoned HDF Member
Join Date: Jan 2009
Location: Ottawa, Ontario
Posts: 11,482
Received 7,038 Likes on 3,667 Posts
Default

Originally Posted by Notgrownup
I put a 114” from a street glide in a 07 Electra Glide with no mods.
M8?
 
  #8  
Old 07-12-2024, 07:05 AM
Schex's Avatar
Schex
Schex is offline
Supporter
Join Date: Apr 2011
Location: SE Louisiana
Posts: 5,285
Received 6,944 Likes on 1,822 Posts
Default

Originally Posted by Notgrownup
I put a 114” from a street glide in a 07 Electra Glide with no mods.
Details!
About the throttle body, dual plugs, M8 ecu and wiring?, tuning, used M8 oil cooler?



 
  #9  
Old 07-12-2024, 07:21 AM
Notgrownup's Avatar
Notgrownup
Notgrownup is offline
Seasoned HDF Member
Join Date: Mar 2009
Location: Snow Hill, NC
Posts: 23,236
Received 6,936 Likes on 3,551 Posts
Default

It was a 103HO from a 14 Street Glide. Swapped the throttle body, activated the ACR’s in the ECU at the dealership gotta New tune. Nothing M8 that was a twin Cam.
 

Last edited by Notgrownup; 07-12-2024 at 07:22 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
harleyrider06010
Primary/Transmission/Driveline/Clutch
3
04-22-2022 11:48 AM
Cesadri
Engine Mechanical Topics
14
05-23-2021 05:40 AM
walttaber
Touring Models
3
07-20-2018 08:25 AM
Vipercupp
General Harley Davidson Chat
0
04-13-2013 09:05 PM
MrRocket
Softail Models
3
08-05-2012 10:16 PM



Quick Reply: milwalkee8 in a TC frame



All times are GMT -5. The time now is 03:35 AM.