M8 Dyno Tuners - Twin Cities, MN Region
#1
M8 Dyno Tuners - Twin Cities, MN Region
The Twin Cities, Minnesota is a big Harley region - very similar to Milwaukee IMO, but 3 times bigger (Wisconsin my home state).
I can't find anybody to recommend a good Harley Dyno Tuner for M8 engines in Minnesota. I'm not riding to Fuel Moto in Appleton, so please respond only if you know a master tuner around here. I'm not gonna list some from a google search - doesn't mean anything.
Would appreciate your help if you know.
I can't find anybody to recommend a good Harley Dyno Tuner for M8 engines in Minnesota. I'm not riding to Fuel Moto in Appleton, so please respond only if you know a master tuner around here. I'm not gonna list some from a google search - doesn't mean anything.
Would appreciate your help if you know.
#2
https://wardperformance.com/about-us-1
You might them on the phone and ask. If he won’t do it then he can recommend someone.
Almost forgot I met this guy who was set up with a trailer in Arkansas at a rally. I didn’t need to have him tune anything, but did chat with him for a while and made 3 pulls for something to do. Friendly and seems to me to know what he’s doing
You might them on the phone and ask. If he won’t do it then he can recommend someone.
Almost forgot I met this guy who was set up with a trailer in Arkansas at a rally. I didn’t need to have him tune anything, but did chat with him for a while and made 3 pulls for something to do. Friendly and seems to me to know what he’s doing
Last edited by harpwrench; 07-06-2024 at 07:09 AM.
The following users liked this post:
Old New Rider (07-06-2024)
#3
The following 2 users liked this post by rigidthumper:
harpwrench (07-06-2024),
Old New Rider (07-06-2024)
#4
#5
The following 2 users liked this post by harpwrench:
Old New Rider (07-06-2024),
rigidthumper (07-06-2024)
#6
#8
I would recommend PTS Tuning in Holmen, WI near the Minnesota border. He's proficient in tuning the latest generation of Dynojet Power Vision products and other tuning platforms as well. www.ptsdyno.com or (507) 382-0487
__________________
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
The following users liked this post:
smitty901 (07-08-2024)
#9
https://wardperformance.com/about-us-1
You might them on the phone and ask. If he won’t do it then he can recommend someone.
Almost forgot I met this guy who was set up with a trailer in Arkansas at a rally. I didn’t need to have him tune anything, but did chat with him for a while and made 3 pulls for something to do. Friendly and seems to me to know what he’s doing
You might them on the phone and ask. If he won’t do it then he can recommend someone.
Almost forgot I met this guy who was set up with a trailer in Arkansas at a rally. I didn’t need to have him tune anything, but did chat with him for a while and made 3 pulls for something to do. Friendly and seems to me to know what he’s doing
#10
I found a years-past thread were Steve Cole suggested Those Dyno Guys in Zimmerman, MN using a bunch of TTS-175 cams, alas they're gone.
They would have been just a little west of me. I think the pandemic crash put a bunch of people out of business. Dr. Mudspringer closed too. Been in Twin Cities a long, long time.
They would have been just a little west of me. I think the pandemic crash put a bunch of people out of business. Dr. Mudspringer closed too. Been in Twin Cities a long, long time.