Trouble with Hammock seat install on 08???
#1
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Hi, I bought a Harley Hammock seat for my 08 Ultra. Arrived via UPS and I have been trying to mount this SOB???? Nothing lines up--- anyone with a 08 have the same issues? Had to have my buddy sit on the back to get the screw in the back. This is a one year rider only seat --53051-09 -- only supposed to fit 08's. Anyone with this same bike and seat willing to take a photo of the underside of the seat? Thanks in advance!!!
BTW the only numbers on it are 23672 and RDW92/61-0067
BTW the only numbers on it are 23672 and RDW92/61-0067
#3
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
I have an 08 and a 12, same issue on the 08 you have (fits the 12 fine)
I don't run it on the 08 but tried it on it. Be careful the rear seat tab doesn't break/crack the plastic once installed (as you have to push it down on rear of seat to put the screw in).
I don't run it on the 08 but tried it on it. Be careful the rear seat tab doesn't break/crack the plastic once installed (as you have to push it down on rear of seat to put the screw in).
Last edited by F150HD; 08-17-2017 at 10:33 PM.
#4
#5
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
FWIW, this seat will fit 09-13 as well. I have it on my 2012 Ultra. I love that seat. Tractor comfort.
Lettuce know what you figure out, or if you sell (at discount or whatnot)
#6
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
If its just a case of the screw tab being higher than the rear fender, cant you put a spacer between the tab and fender to make up the gap and use a longer screw?
#7
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Hi, I bought a Harley Hammock seat for my 08 Ultra. Arrived via UPS and I have been trying to mount this SOB???? Nothing lines up--- anyone with a 08 have the same issues? Had to have my buddy sit on the back to get the screw in the back. This is a one year rider only seat --53051-09 -- only supposed to fit 08's. Anyone with this same bike and seat willing to take a photo of the underside of the seat? Thanks in advance!!!
BTW the only numbers on it are 23672 and RDW92/61-0067
BTW the only numbers on it are 23672 and RDW92/61-0067
Trending Topics
#8
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Hi, I bought a Harley Hammock seat for my 08 Ultra. Arrived via UPS and I have been trying to mount this SOB???? Nothing lines up--- anyone with a 08 have the same issues? Had to have my buddy sit on the back to get the screw in the back. This is a one year rider only seat --53051-09 -- only supposed to fit 08's. Anyone with this same bike and seat willing to take a photo of the underside of the seat? Thanks in advance!!!
BTW the only numbers on it are 23672 and RDW92/61-0067
BTW the only numbers on it are 23672 and RDW92/61-0067
(That is my Hammock, I threw it on my 08 and took a pic. When sitting on it, it seems to touch the lids)
![](https://cimg8.ibsrv.net/gimg/www.hdforums.com-vbulletin/2000x1504/ham_a1df58632d7b04c4be6bd068742e306d44ceefc3.jpg)
The following users liked this post:
chickenhauler (08-21-2017)
#9
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Is it hitting something? Do you have a rider backrest? Passenger grab bars? 2" sounds like a lot to be off. My Hammock hit my rider backrest mount. I played with the mount location and shaved a little bit of the plastic from the seat frame. Works great now. Hope you get it worked out.
Yes mine did the same--couldn't open either bag without hitting the seat & and would have over time tore the seat. The bumpers on the seat pan hit both side panels and would have scratched the paint???
Last edited by chickenhauler; 08-21-2017 at 03:43 PM.
The following users liked this post:
F150HD (08-21-2017)
Thread
Thread Starter
Forum
Replies
Last Post