Stock Solenoid Starter Switch
#11
pococj,
If it's really worth it, I'll get those parts silver plated. Does one just take it to a jeweler to have them done? I was thinking of talking to one of the electricians at work and asking about where it could be done. Some sort of industrial plater? Was it pure silver or an alloy? It shouldn't cost too much.
If it's really worth it, I'll get those parts silver plated. Does one just take it to a jeweler to have them done? I was thinking of talking to one of the electricians at work and asking about where it could be done. Some sort of industrial plater? Was it pure silver or an alloy? It shouldn't cost too much.
#13
Hi cj_slowdown!
Hi Rodney!
Rodney,
That switch of yours is from V Twin, right? Like I told you I had been knocking around the idea of building something like that at one time. If I ever do...I'm sure it would make Fred Flintstone proud!!
Later guys.
cj_slowdown,
Keep the info coming. I am very interested in the outcome of this problem.
Hi Rodney!
Rodney,
That switch of yours is from V Twin, right? Like I told you I had been knocking around the idea of building something like that at one time. If I ever do...I'm sure it would make Fred Flintstone proud!!
Later guys.
cj_slowdown,
Keep the info coming. I am very interested in the outcome of this problem.
been a busy summer for me and haven't had a lot of extra time to visit and when I did the forum was acting up... hopefully all is fixed!
Yes the starter switch is a V twin item that so far I am very pleased with.
I'll see you around and let you know what I've been up to.... it has some thing to do with an old shovel head Chopper!!!
#15
“Rodney”
“here is the switch and relay needed to convert..”
Rodney,
Well I am half way there, I do have half the set-up, the starter relay switch from Blue Streak, all I need is the other half, where from ?
remember when Blue Streak was made in the USA ? it's sad : - (
BTW- as long as my Primary cover was off (changing primary gasket, I said what the hell should change out the thrust washer, was getting a little beat, the marks wasn't too bad, but as long as the cover is off why not !
attached is a pic of both washers old one on top of the bill !!!!
I think with what money I have left, I am going to by copper and brass stocks !!!!
later
cj
“here is the switch and relay needed to convert..”
Rodney,
Well I am half way there, I do have half the set-up, the starter relay switch from Blue Streak, all I need is the other half, where from ?
remember when Blue Streak was made in the USA ? it's sad : - (
BTW- as long as my Primary cover was off (changing primary gasket, I said what the hell should change out the thrust washer, was getting a little beat, the marks wasn't too bad, but as long as the cover is off why not !
attached is a pic of both washers old one on top of the bill !!!!
I think with what money I have left, I am going to by copper and brass stocks !!!!
later
cj
#16
#17
The stealership struck again. They charged you for an entire package of Washers and gave you one. They come in packages of 5 or 10 and that is retail for the whole package. Hell even JP only gets 3.99 for it and they are high. I'd go back and bitch. Sometimes they get a rookie behind the counter that can't divide.
Thread
Thread Starter
Forum
Replies
Last Post