1982 shovel motor
#13
What i see - stock lifters hyd - but after market lifter blocks - evo lobe profile ???? And shovel parts but the cam lobe lift is almost exact
the cam has me thinking - if i had a shovel i own was running i would swap that out to what you have and dyno it - just because
stranger **** has happened and worked
the cam has me thinking - if i had a shovel i own was running i would swap that out to what you have and dyno it - just because
stranger **** has happened and worked
#15
What i see - stock lifters hyd - but after market lifter blocks - evo lobe profile ???? And shovel parts but the cam lobe lift is almost exact
the cam has me thinking - if i had a shovel i own was running i would swap that out to what you have and dyno it - just because
stranger **** has happened and worked
the cam has me thinking - if i had a shovel i own was running i would swap that out to what you have and dyno it - just because
stranger **** has happened and worked
I haven't heard this run.
I bought it as is ..only was gonna replace what needed n get it running.
But seems she's Frankensteined all up.
so I'm either stuck buying all new everything or freshen up top end put back together and hope for the best
I paid $1800 canadian, and was hoping only to dump another $1800 Canadian into it.
Not looking for performance .just a running and as reliable a a shovel can be engine.
I'm using an 89 5 speed tranny and put in gears shifter and pawl from a 2002 up 5speed
It's going in an 89 flt frame
#16
#17
I'm doing it myself
i did a complete rebuild on my TC
bottom up.
This is my first shovel ..always wanted one
Appreciate it a lot
#18
The following users liked this post:
tinymike66 (02-02-2022)
#19
#20