Let me first say I do love this bike but....I had my 09 se springer dyno'ed last wk, only mod V&h big radias and sert. heres the #'s 86 hp, 110tq. what the..
needless to say I was a bit dissapointed. I have a 08 sg 103 stage II w/rinehart td that gave me 87hp and 104 tq and a 09 RK 103 stage II w/bub 7's that gave me 84hp and 103 tq. I guess I'll have to look for a cam upgrade. makes you wonder how the new limited ultra stacks up against the se ultra.

 

Yep. A buddy of mine as a 09 SE RG and he added a SERT,and Bassani Performance True Duals and had it Dyno'ed last week and it only hit 86HP and 100 Tq

 

Mine was real close to yours. 89 hp 113 tq. All I know is it's a lot more powerful than the standard displacement non Screamin Eagle Harley motor. I added the pipes and SERT just so it would run better,not necessarily faster. I'm happy with the power,and I'm coming off a 180 hp Kawi ZX 12.

 

the factory hp and tq in the new bike listing is at the crank not the wheel.

 

I had mine dynoed before doing any mods and (mine being a 2007 FXDSE) produced those numbers stock (92 hp and 109 torque), after the pipes, heavy breather and fuel processor it was about 109hp and 117 torque, after cam swaps it is pulling 121 hp and 127 torque. Did the MOCO change something on the 2008-2009's?

 

True duals rob horsepower...............period.

 

I have the 2007 FXDSE and after adding Rinehart dual's and a Power Commander, my dyno was only 79 HP and 107 TQ. Made me wish I had not spent the $$. I did not have it Dyno'd before the work, so I don't know the orginal #'s, but I can tell you, I could not feel any difference. Oh - and I put the quiet baffles in so my neighbors would hate me slightly less, which should get the TQ up a couple of notches. So now I have pissed of the neighbors and do not have much to show for it.

 

I have a 09 screaming eagle 110 and I have D & D two into one pipes, Big Sucker Breather, Power Command and cams and I got 126 HP and 125 Torque. The key is in the pipes. when I put them on after the other mods , it jump 18hp

 

Please share details on your setup. What cams are you running? Did you have to work on the heads or go with higher compression pistons? Can I have your map?
Thanks

 

I agree woodeyewetzel please post!